History of the manufacturer
Sonotone Corporation, Elmsford, New York
As a member you can upload pictures (but not
single models please) and add text.
Both will display your name after an officer has activated your content, and will be displayed under «Further details ...» plus the text also in the forum.
Both will display your name after an officer has activated your content, and will be displayed under «Further details ...» plus the text also in the forum.
| Name: | Sonotone Corporation, Elmsford, New York (USA) |
| Abbreviation: | sonotone |
| Products: | Model types Others Tube manufacturer |
| Summary: |
Sonotone was a well known manufacturer of piezoelectric ceramic cartridges and tubes. They also built some audio equipment. |
| History: |
This manufacturer was suggested by Emilio Ciardiello.
Some models:
| Country | Year | Name | 1st Tube | Notes |
|---|---|---|---|---|
| USA | 56 | High Fidelity Amplifier HFA-100 | 12 W amplifier; 20 to 20,000 Hz within 1 dB. Inputs for ceramic cartridge, tuner, tape and... | |
| USA | 56 | Control Unit CU-50 | Used with the HFA-100 or with other amplifiers, the CU-50 gives complete chairside tone, v... | |
| USA | 60 | HFA-150 | Sonotone HFA-150; 15 W, 6 inputs, bass, contour & treble control. | |
| USA | 67 | Sonotone 23" 528.52400E | 6AQ5A | Tube rectifier is on the schematic but no identified. Blanco y Negro Norma "N". |
| USA | 51 | Hearing Aid 977 | Batteries are models 507E 30 volt 'B' and 6E1E 1,5 volt 'A' | |
| USA | 65 | Wide-Range Low-Impedance Ceramic Microphone CM-1050WR | 50 - 10.000 Hz. | |
| USA | 50 | Voltmeter | R=130 Ohm |
[rmxhdet-en]