Integrated Stereo Amplifier E-305

Accuphase Laboratory; Yokohama

  • Year
  • 1987
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 156736

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • 77
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 100; 117; 220; 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 360 W (undistorted)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Integrated Stereo Amplifier E-305 - Accuphase Laboratory; Yokohama
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 475 x 170 x 375 mm / 18.7 x 6.7 x 14.8 inch
  • Notes
  • Accuphase Integrated Stereo Amplifier Model E-305
    Power output:
    130 watts per channel into 8Ω (stereo)
    180 watts per channel into 4Ω (stereo)
    Frequency response: 20Hz to 20kHz
    Total harmonic distortion: 0.02%
    Damping factor: 100
    Input sensitivity: 0.08mV (MC), 2.5mV (MM), 120mV (line)
    Signal to noise ratio: 66dB (MC), 86dB (MM), 106dB (line)
    Tone Controls:
    Bass 300Hz +/-10dB (50Hz)
    Treble 3000Hz +/-10dB (20000Hz)
    Loudness
    Subsonic Filter 17Hz, -12dB
    Speaker load impedance: 4Ω to 16Ω

    Semiconductors:
    77x transistors, 34x FET's, 20x IC's, 78x diodes

  • Net weight (2.2 lb = 1 kg)
  • 20.5 kg / 45 lb 2.5 oz (45.154 lb)
  • Mentioned in
  • -- Original prospect or advert (Accuphase Sales Brochure)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Service Manual)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum