7T10 (-N) Ch= 5K1 (UL5K1) Octal and Loctal

Admiral (brand) Continental Radio & Television Co.; Chicago, IL

  • Année
  • 1947/1948
perfect model
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 31388
    • alternative name: Continental Radio & TV

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de tubes
  • 5
  • Principe général
  • Super hétérodyne (en général); FI/IF 455 kHz
  • Circuits accordés
  • 6 Circuits MA (AM)
  • Gammes d'ondes
  • PO uniquement
  • Tension / type courant
  • Appareil tous courants (CA / CC) / 117 Volt
  • Haut-parleur
  • HP dynamique à aimant permanent + bobine mobile / Ø 5 inch = 12.7 cm
  • Matière
  • Boitier en bakélite
  • De Radiomuseum.org
  • Modèle: 7T10 Ch= 5K1 [Octal and Loctal] - Admiral brand Continental
  • Forme
  • Modèle de table sans poussoirs, modèle cheminée
  • Dimensions (LHP)
  • 13 x 8 x 7 inch / 330 x 203 x 178 mm
  • Remarques
  • Built-in loop antenna. There is also a variant which employs Octall tubes only.

    Colors:

    • 7T10E = ebony / black
    • 7T10M = mahogany
    • 7T10C = ivory
    • ebony w/ ivory louver (mentioned in Rider's 17)
    • ivory w/ ebony louver (mentioned in Rider's 17)

    The difference between models with and without -N suffix is currently unknown.

  • Poids net
  • 6 lb 8 oz (6.5 lb) / 2.951 kg
  • Prix de mise sur le marché
  • 19.95 $
  • Source extérieure
  • Ernst Erb
  • Source du schéma
  • Rider's Perpetual, Volume 17 = 1948 and before

 Collections | Musées | Littérature

Collections

Le modèle 7T10 (-N) fait partie des collections des membres suivants.

 Forum

Contributions du forum pour ce modèle: Admiral brand: 7T10 Ch= 5K1

Discussions: 1 | Publications: 2

This is my first post, and I'm a beginner.  I got this radio out of a barn loft and I'm guessing it hasn't been used in 30 to 40 years.  I opened it up and saw that the speaker cone had been eaten out and a blown capacitor was hanging loose.  I decided to restore this radio.  I replaced all of the paper capacitors with new modern capacitors.  I found a used speaker on ebay which was the same model.  I just got finished with it and turned it on and to my joy it warmed up quickly and I started receiveing stations right away.  My question is, is it normal in an old am radio to get signal bleeds of other stations trying to come in on the same frequency?  I live about 35 miles from a big city and get some of the stations very strong, but with other stations being lightly heard trying to come in on that frequency also.  I've picked up stations in other states also, with the same problem.  I have not done anything else to the radio other than clean the tuner with contact cleaner.  It was dirty and a little corroded.  When I rotate the dial, it moves freely after using the contact cleaner.  The sound is great and nice volume without distortion.

Tim Dees, 07.Mar.12

Weitere Posts (2) zu diesem Thema.