Variable Optical Attenuator 107059-6

AMP Incorporated; Harrisburg, PA

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 2001 ?
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 357502

 Technische Daten

  • Wellenbereiche
  • Wellen in den Bemerkungen.
  • Betriebsart / Volt
  • Keine Stromversorgung
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Diverses Material
  • von Radiomuseum.org
  • Modell: Variable Optical Attenuator 107059-6 - AMP Incorporated; Harrisburg,
  • Abmessungen (BHT)
  • 54.1 x 43.2 x 6.35 mm / 2.1 x 1.7 x 0.3 inch
  • Bemerkung

  • The AMP Model 107059-6 Variable Optical Attenuator contains a specially processed fibre that can be adjusted to varying radii by the user. The attenuator is an uncalibrated device that can be used for optical power level setting. It is fitted with 3 mm diameter 1-metre long fibres with PC polished ST connectors. (Alternative 3-metre fibres, FC and SC connectors, and SPC, UPC and APC polish types were available, and the attenuator could also be supplied with 1.2-metre fibres without connectors). Cladding modes are well controlled and the attenuator is insensitive to polarization.

    The attenuation is continuously adjustable by a screw that is positioned on a narrow face such that multiple attenuators can be stacked side by side.

    Minimum attenuation < 2 dB
    Maximum attenuation ≥ 40 dB
    Unconnectorized reflectance ≤ -65 dB
    ST/PC back reflection -45 dB
    Operational wavelength 1250 to 1580 nm
    Vibration resistance < 0.15 x attenuator setting
    Operating temperature -40 to 75 ˚C

  • Nettogewicht
  • 0.064 kg / 0 lb 2.3 oz (0.141 lb)
  • Literaturnachweis
  • - - Manufacturers Literature (Data sheet)
  • Autor
  • Modellseite von Bruce Taylor angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Variable Optical Attenuator befindet sich in den Sammlungen folgender Mitglieder.

 Forum