radiomuseum.org

8100 Model 35 Table model

8100 Model 35; Atwater Kent Mfg. Co (ID = 84503) Radio
 
8100 Model 35; Atwater Kent Mfg. Co (ID = 700146) Radio
 
8100 Model 35; Atwater Kent Mfg. Co (ID = 700148) Radio
 
8100 Model 35; Atwater Kent Mfg. Co (ID = 700150) Radio
 
8100 Model 35; Atwater Kent Mfg. Co (ID = 700151) Radio
 
8100 Model 35; Atwater Kent Mfg. Co (ID = 1625960) Radio
8100 Model 35; Atwater Kent Mfg. Co (ID = 2380612) Radio 8100 Model 35; Atwater Kent Mfg. Co (ID = 2383560) Radio
8100 Model 35; Atwater Kent Mfg. Co (ID = 529859) Radio 8100 Model 35; Atwater Kent Mfg. Co (ID = 423877) Radio
8100 Model 35; Atwater Kent Mfg. Co (ID = 65646) Radio 8100 Model 35; Atwater Kent Mfg. Co (ID = 266514) Radio
8100 Model 35; Atwater Kent Mfg. Co (ID = 423878) Radio 8100 Model 35; Atwater Kent Mfg. Co (ID = 423880) Radio
8100 Model 35; Atwater Kent Mfg. Co (ID = 527315) Radio 8100 Model 35; Atwater Kent Mfg. Co (ID = 529860) Radio
Für mehr: roten Scrollbalken bedienen.
8100 Model 35; Atwater Kent Mfg. Co (ID = 2380612) Radio
Atwater Kent Mfg. Co: 8100 Model 35 [Radio] ID = 2380612 1400x584
Wählen Sie rechts durch klick. Mitglieder klicken für Download in gross.
Für Modell 8100 Model 35 Table model, Atwater Kent Mfg. Co.; Philadelphia, USA:
Collection privée (réf.: 90)
 
Land:  USA
Hersteller / Marke:  Atwater Kent Mfg. Co.; Philadelphia, USA
Jahr: 1926 Kategorie: Rundfunkempfänger (Radio - oder Tuner nach WW2)
Röhren 6: CX301A CX301A CX301A CX301A CX301A CX371A
Hauptprinzip Geradeaus ohne Rückkopplung
Anzahl Kreise 3 Kreis(e) AM
Wellenbereiche Mittelwelle, keine anderen.
Spezialitäten
Betriebsart / Volt Akku und/oder Batterie
Lautsprecher - Dieses Modell benötigt externe(n) Lautsprecher.
Belastbarkeit/Leistung
von Radiomuseum.org Modell: 8100 Model 35 [Table model] - Atwater Kent Mfg. Co.;
Material Metallausführung
Form Tischmodell, Zusatz nicht bekannt - allgemein.
Abmessungen (BHT) 17.2 x 5.25 x 7.5 inch / 437 x 133 x 191 mm
Bemerkung

One single rheostat only; One dial (primary tuning control knob) Detector can be CX-301A, CX-300A or CX-112A. 2nd AF can be CX-371A or CX-112A.

Nettogewicht 5.5 kg / 12 lb 1.8 oz (12.115 lb)
Originalpreis 70.00 $
Sammlerpreise  
Datenherkunft extern Ernst Erb
Datenherkunft Radio Collector`s Guide 1921-1932
Schaltungsnachweis Rider's Perpetual, Volume 1 = 1931/1934 (for 1919-1931)
Literaturnachweis Collector's Guide to Antique Radios 4. Edition
Literatur/Schema (1) A.Atwater Kent, The Man, 2002


Alle gelisteten Radios usw. von Atwater Kent Mfg. Co.; Philadelphia, USA
Hier finden Sie 502 Modelle, davon 318 mit Bildern und 325 mit Schaltbildern.



 


Forumsbeiträge zum Modell
Atwater Kent Mfg. Co: 8100 Model 35
Threads: 1 | Posts: 4
Klicks: 2737     Antworten: 3
Atwater Kent 35 paint
Javier Albinarrate
14.Sep.11
  1

Hello folks,

I have a two AK 35 in my workshop awaiting restoration. They are in a fairly good condition.

The question I have is related to the paint these ones had.

The thing is that mine, and I think all the ones I have ever seen on internet, have the paint deteriorated and crackled.

Like this:

 

So the question is... the original paint was all solid and flat? Or did it come with some sort of crackle that with time deteriorated?

OR... is it that being a metal case, with the temprature changes, the case caused forces that eventually broke the layer of bright finish?

A couple more pics of details:

These last two, show that there is still some crackle, but without the top layer being deteriorated..

All in all, any ideas of how I should process the cabinet will be appreciated.

REGARDS!

 

 

Rüdiger Walz
15.Sep.11
  2

First of all: Please post your questions starting from the model ! You will find it here . Go to "Uploads and questions" and then "Forum info or question".

The Atwater Kent models very often have been painted with a so called "crinkle laquer". This paint has some benefits.

First of all small defects on the surface of a metall sheet become invisible and the design of the radio looks more interesting.

Second the paint could be dried in an oven within a short time which makes mass production much easier.

Your first picture obviously shows a deteriorated surface but the other pictures look good and may only need a little bit polishing with a wax.

It is very difficult to find somebody today who is able to do a crinkle lacquer painting. Experiments with a spray can from a do-it-yourself market are not satifying. Your first example may only need a coating with a clear lacque. Do some experiments on a small spot on the backside of the radio.

Rüdiger Walz

 

 

Ernst Erb
15.Sep.11
  3

We have this unique feature that one can post by using the model page - and then the thread sticks to the model. The same with tubes, museums, countries and manufacturers.

Please use this function - I did now move the article manually.

Javier Albinarrate
27.Sep.11
  4

Thanks a lot! These were precisely the details I was looking for.

So the idea is to try to not touch the paint, nor disturb the crackles. And worst case, leave the cracks alone, remove only lightly anything that is loose (like the top transparent laquer), and then spray to cover, while leaving the irregular veins in the paint.

And above all... never ever sand it.

PS: Sorry for posting in the talk forum. I had never posted on a model before.

 
Atwater Kent Mfg. Co: 8100 Model 35
Ende Forumsbeiträge zum Modell

  
rmXorg