- Land
- USA
- Hersteller / Marke
- Atwater Kent Mfg. Co.; Philadelphia, USA
- Jahr
- 1923
- Kategorie
- Rundfunkempfänger (Radio - oder Tuner nach WW2)
- Radiomuseum.org ID
- 183317
- Anzahl Röhren
- 2
- Hauptprinzip
- Geradeaus ohne Rückkopplung
- Anzahl Kreise
- 1 Kreis(e) AM
- Wellenbereiche
- Mittelwelle, keine anderen.
- Betriebsart / Volt
- Akku und/oder Batterie
- Lautsprecher
- - Für Kopfhörer oder NF-Verstärker
- Material
- Holz, von aussen SICHTBARE RÖHREN.
- von Radiomuseum.org
- Modell: 4120 - Atwater Kent Mfg. Co.;
- Form
- Tischmodell, Zusatz nicht bekannt - allgemein.
- Abmessungen (BHT)
- 25 x 0 x 8.5 inch / 635 x 0 x 216 mm
- Bemerkung
-
Similar in design and functionality to the more common 4052, the 4120 is a relatively simple 2-tube set with no provision on the board for AF amplification. Instead of the three tube T/A used on the 4052 the 4120 replaced the T/A with just the detector island. Comprising a detector, an RF amplifer, an RF transformer, a potentiometer, and a Type 11 tuner, the 4120 was designed to be used exclusively with headphones. The radio was sold through AK dealers, but it was ordered from the factory (and assembled there) strictly on an as-needed basis, and since few people in 1923 were looking for a radio without AF amplification, very few of these sets were manufactured.
- Originalpreis
- 45.00 $
- Literaturnachweis
- Radio Manufacturers of the 1920s, Vol 1 (Page 73)
- Autor
- Modellseite von Alan Larsen angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.
- Weitere Modelle
-
Hier finden Sie 508 Modelle, davon 332 mit Bildern und 332 mit Schaltbildern.
Alle gelisteten Radios usw. von Atwater Kent Mfg. Co.; Philadelphia, USA