radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

Solitude 3 ab 23567

Solitude 3; Becker, Max Egon, (ID = 141296) Car Radio
Solitude 3; Becker, Max Egon, (ID = 141700) Car Radio Solitude 3; Becker, Max Egon, (ID = 141715) Car Radio
Solitude 3; Becker, Max Egon, (ID = 141716) Car Radio Solitude 3; Becker, Max Egon, (ID = 141717) Car Radio
Use red slider bar for more.
Solitude 3; Becker, Max Egon, (ID = 141700) Car Radio
Becker, Max Egon,: Solitude 3 [Car Radio] ID = 141700 933x634
Select picture or schematic to display from thumbnails on the right and click for download.
For model Solitude 3 ab 23567, Becker, Max Egon, Autoradiowerk Ittersbach bei Pforzheim
 
Country:  Germany
Manufacturer / Brand:  Becker, Max Egon, Autoradiowerk Ittersbach bei Pforzheim
Year: 1952 Category: Car Radio, perhaps also + sound player/recorder
Valves / Tubes 5: ECH42 EAF42 ECH42 EL41 EL41
Main principle Super-Heterodyne (Super in general)
Tuned circuits 6 AM circuit(s)
Wave bands Broadcast, Long Wave and Short Wave.
Details
Power type and voltage Storage Battery for all (e.g. for car radios and amateur radios) / 6; 12 Volt
Loudspeaker - This model requires external speaker(s).
Power out
from Radiomuseum.org Model: Solitude 3 [ab 23567] - Becker, Max Egon,
Material Metal case
Notes Autoradio für Mercedes, Frontblende aus Holz.
Collectors' prices  
Source of data Radiokatalog Band 2, Ernst Erb
Literature/Schematics (1) -- Schematic

Model page created by Richard Winter. See "Data change" for further contributors.



All listed radios etc. from Becker, Max Egon, Autoradiowerk Ittersbach bei Pforzheim
Here you find 295 models, 201 with images and 155 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.



 


Forum contributions about this model
Becker, Max Egon,: Solitude 3
Threads: 1 | Posts: 2
Hits: 1791     Replies: 1
becker: Speaker Impedance for 1952 Becker Solitude 3
Francis Seidl
11.Aug.10
  1

Weiß jemand den passenden Lautsprecher Impedanz für Becker Solitude 3?  Does anyone know the correct speaker impedance for the Becker Solitude 3?  Thank You!
 

Bernhard Nagel
11.Aug.10
  2

Dear Francis,

the Becker Solitude 3 needs a low impedance speaker.

The schematic shows a tapped output transformer, the lower secondary winding requires 2.5 Ohms as a correct speaker load. This connection ends at the screw terminals. You may use two speakers (each 4...5 Ohms) in parallel to ensure proper working.

If only one loudspeaker (4...5 Ohms) is used, the speaker connection at the output transformer should be changed from the center tap to the (unused) high tap.

Bernhard

 
Becker, Max Egon,: Solitude 3
End of forum contributions about this model

  
rmXorg