Three Way Loudspeaker System Ditton 66 Series I (1)

Celestion; Kingston-on-Thames, Ipswich

  • Year
  • 1974 ?
  • Category
  • Loudspeaker, headphone or earphone
  • Radiomuseum.org ID
  • 289182

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Wave bands
  • - without
  • Power type and voltage
  • No Power needed
  • Loudspeaker
  • 3 Loudspeakers
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Three Way Loudspeaker System Ditton 66 [Series I ] - Celestion; Kingston-on-Thames,
  • Shape
  • Console with any shape - in general
  • Dimensions (WHD)
  • 380 x 1000 x 290 mm / 15 x 39.4 x 11.4 inch
  • Notes
  • 3-Way Speaker System Model Celestion Ditton 66 Series I (1).
    Type: 3 way, 4 driver loudspeaker system
    Frequency Response: 18Hz to 40kHz
    Recommended Amplifier: 10 to 160 Watt
    Crossover Frequency: 500, 5000Hz
    Impedance: 4Ω
    Sensitivity: 90dB
    Drivers:
    Sub Bass: 1 x cone
    Bass: 1 x 12" cone
    Midrange: 1 x 2.25" soft dome
    Tweeter: 1 x HF2000
    Enclosure: 75 litre
    Finish: teak, walnut

  • Net weight (2.2 lb = 1 kg)
  • 30 kg / 66 lb 1.3 oz (66.079 lb)
  • Mentioned in
  • -- Original prospect or advert (Mr. Ditton Loudspeakers, Ditton)
  • Literature/Schematics (1)
  • -- Original prospect or advert (Celestion Flyer)
  • Literature/Schematics (2)
  • Funk-Technik (FT) (15/1974, S. 535, 536 / Beschreibung, Daten, Schema)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Three Way Loudspeaker System is part of the collections of the following members.

 Forum