• Year
  • 1925
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 236922
    • alternative name: Dayton Fan and Motor Co.

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 5
  • Main principle
  • TRF without regeneration
  • Tuned circuits
  • 3 AM circuit(s)
  • Wave bands
  • Broadcast only (MW).
  • Power type and voltage
  • Storage and/or dry batteries / 6 & 22.5 & 90 Volt
  • Loudspeaker
  • Horn / Ø 3.5 inch = 8.9 cm
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Day-Craft 5 5046 - Day-Fan Electric Co.; Dayton,
  • Shape
  • Tablemodel, slant panel.
  • Dimensions (WHD)
  • 30.75 x 12.5 x 14.75 inch / 781 x 318 x 375 mm
  • Notes
  • This Day-Craft 5 Model 5046 radio has a 1500 ohm horn speaker built in. A rheostat (for the two RF stages) is accessible from the front panel labeled as "Volume"; another one (for the detector and audio stages) is mounted inside and not labeled at all. There are three tuning knobs on the front panel, the large center one will drive all three variable capacitors uniformly; two smaller knobs adjust the first and third tuned stages individually.

    Terminals for external antenna and ground. Adjustable aerial coupling by a variocoupler. Another knob allows to select one or two stages of audio amplification.

  • Net weight (2.2 lb = 1 kg)
  • 26.5 lb (26 lb 8 oz) / 12.031 kg
  • Author
  • Model page created by Hank Kaczmarski. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Day-Craft 5 is part of the collections of the following members.

 Forum