Quad Noise Gate 1074

dbx Inc.; Waltham (MA)

  • Anno
  • 2011 ?
  • Categoria
  • Miscellanea (Altro, Varie) - vedere nelle note
  • Radiomuseum.org ID
  • 316070

 Specifiche tecniche

  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 240 Volt
  • Altoparlante
  • - Per cuffie o amplificatori esterni
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Quad Noise Gate 1074 - dbx Inc.; Waltham MA
  • Forma
  • Rack
  • Dimensioni (LxAxP)
  • 483 x 44 x 201 mm / 19 x 1.7 x 7.9 inch
  • Annotazioni
  • System Performance
    Bandwidth: 20 Hz to 20 kHz, +0/-0.5 dB
    Frequency Response: 0.35 Hz to 200 kHz, +0/-3 dB
    Noise: < -96 dBu, unweighted, 22 kHz measurement bandwidth
    Dynamic Range: > 115 dB, unweighted
    THD+Noise: 0.008% typical at +4 dBu, 1 kHz unity gain
    0.08% typical at +20 dBu, 1 kHz, unity gain
    < 0.1% any amount of compression up to 40 dB, 1 kHz
    Interchannel Crosstalk: < -80 dB 20 Hz to 20 kHz
    Stereo Coupling: True RMS Power Summing
    Output Transformer Per Channel: Jensen® JT-123-dbx or BCI™ RE-123-dbx

    Input
    Connectors: XLR (Pin 2 and tip hot)
    Type: Electronically balanced/unbalanced, RF filtered
    Impedance: Balanced > 50 kOhm, unbalanced >25 kOhm
    Max Input Level: > +22 dBu balanced or unbalanced
    CMRR: 40dB: Typically >55 dB at 1 kHz
    Key Input: Electronically balanced/unbalanced, RF filtered Balanced 50 kOhm, unbalanced >25 kOhm


    Output
    Connectors: XLR (Pin 2 hot)
    Type: Servo-balanced/unbalanced, RF filtered
    Impedance: Balanced 60 Ohm, unbalanced 30 Ohm
    Max Output Level: > +22 dBm balanced, > +20 dBm unbalanced

  • Autore
  • Modello inviato da Bartosz Szwed. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Quad Noise Gate fa parte delle collezioni dei seguenti membri.

 Forum