Integrated Amplifier PMA-510AE

A stereo hi-fi integrated amplifier in a black or silver metal case with remote control  (RC-1131).  Denon's Signal Level Divided Construction (S.L.D.C.) and  High Current Single Push-Pull Circuit. RCA input sockets for Phono (MM), CD, Tuner and Line, RCA Record/Playback sockets for 2 Tape Recorders, terminals for 2 pairs of loudspeakers, jack for headphones and a switched AC outlet. Rotary Bass and Treble tone controls, buttons for Loudness and Source Direct.

Specification
Power amplifier section
Rated output:       45 W + 45 W (8 ohms, 20 Hz - 20 kHz, THD 0.07%)
                           70 W + 70 W (4 ohms, 1 kHz, THD 0.7%)
Total harmonic distortion: 0.02% (8ohms, 1 kHz)
Preamplifier section
Phono equalizer
Rated output              150 mV (REC out terminal)
Input sensitivity / Impedance :
                      Line    100 mV/47 kohms (Source Direct: OFF)
                                100 mV/16 kohms (Source Direct: ON)
                      Phono  2.5 mV/47 kohms
RIAA deviation Phono  20 Hz - 20 kHz, ±0.5 dB
Signal-to-noise ratio (IHF A network):
                      Line    105 dB (Source Direct: ON)
                      Phono  84 dB (MM) (input terminals shorted, input signal 5 mV)
Input sensitivity:          2.5mV (MM), 100mV (line)
Signal to noise ratio:   84dB (MM), 105dB (line)
Speaker load impedance: 4 Ohm  to 16 Ohm

Power Requirements
Power supply             230V AC, 50 Hz
Power consumption    185 W (Stand-by: less than 0.3 W)

Made in China

Vous pourrez trouver sous ce lien 472 modèles d'appareils, 460 avec des images et 48 avec des schémas.
Tous les appareils de Denon (Marke / brand)