Audio Oscillator 1311 (1311-A)

General Radio Company; Cambridge (MA)

  • Year
  • 1962 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 263472
    • alternative name: GenRad

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • 8
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 105-125 or 210-250 Volt
  • Loudspeaker
  • - For headphones or amp.
  • Power out
  • 1 W (unknown quality)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Audio Oscillator 1311 - General Radio Company;
  • Shape
  • Tablemodel, with any shape - general.
  • Dimensions (WHD)
  • 8 x 6 x 7.75 inch / 203 x 152 x 197 mm
  • Notes
  • General Radio Audio Oscillator 1311 (1311-A) is a transistorized RC Oscillator, which makes extensive use of negative feedback to attain amplitude and frequency stability of high order, as well as long-term reliability. The output system uses a multitap shielded transformer, capable of matching impedances from 0.25 to 2500 ohms. The output is well isolated from the oscillator circuitry to provide a distortion-free waveform to any impedance, including short circuit. See datasheet.

    Output:
    -   11 fixed frequencies from 50 - 10.000 Hz
    -   voltage: 0 - 100 V
    -   current: 0 - 4.000 mA (short circuit)
    -   max. 1W into matched load.

  • Net weight (2.2 lb = 1 kg)
  • 2.8 kg / 6 lb 2.7 oz (6.167 lb)
  • Mentioned in
  • -- Original-techn. papers. (GR, Operating Instructions, June 1963.)
  • Literature/Schematics (1)
  • General Radio Experimenter Aug/Sept 1962
  • Author
  • Model page created by a member from A. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Audio Oscillator is part of the collections of the following members.

 Forum