Standard Receiver

General Radio Co. Ltd.; London

  • Jahr
  • 1927
  • Kategorie
  • Rundfunkempfänger (Radio - oder Tuner nach WW2)
  • Radiomuseum.org ID
  • 202593

 Technische Daten

  • Anzahl Röhren
  • 2
  • Röhren
  • Hauptprinzip
  • Geradeaus oder Audion mit Rückkopplung
  • Anzahl Kreise
  • 1 Kreis(e) AM
  • Wellenbereiche
  • Mittelwelle und Kurzwelle.
  • Betriebsart / Volt
  • Akku und/oder Batterie
  • Lautsprecher
  • -Lautsprecher eingebaut, aber System nicht erfasst. / Ø 6 inch = 15.2 cm
  • Material
  • Gerät mit Holzgehäuse
  • von Radiomuseum.org
  • Modell: Standard Receiver - General Radio Co. Ltd.; London
  • Form
  • Tischgerät, Truhenform, meist mit Deckel (NICHT Schrägpult).
  • Bemerkung
  • General Radio’s redesigned 2-valve standard receiver used a regenerative detector followed by a transformer-coupled audio amplifier. Reaction was adjusted by two movable coils with a reduction gear. Waveband switching excluded part of the aerial coil for short-wave reception. The set’s valves had double filaments: if one failed, the other could be connected. Filament consumption was just over 0.1 amp at 1.4 volts. Valve holders featured spring contacts with a helical phosphor-bronze shock absorber.

    Power was supplied by a Filonator battery and a Radiobats high-tension battery. The Walnut cabinet included a built-in 4-inch metal cone loudspeaker, two edgewise dials (for tuning and reaction), an on-off switch, and a wave-change switch, with magnifying windows for easy dial reading.

    The complete set was delivered & installed for £12.

  • Originalpreis
  • 12.00 GB £
  • Autor
  • Modellseite von John Koster angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum