Digital LCR Meter 4261A

Hewlett-Packard, (HP); Palo Alto, CA

  • Año
  • 1976–1986 ?
  • Categoría
  • Aparato de medida y servicio (Equipo de laboratorio).
  • Radiomuseum.org ID
  • 271329

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de transistores
  • 85
  • Semiconductores
  • Gama de ondas
  • - no hay
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 110-120; 220-240 Volt
  • Altavoz
  • - - No hay salida de sonido.
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: Digital LCR Meter 4261A - Hewlett-Packard, HP; Palo Alto
  • Forma
  • Sobremesa de cualquier forma, detalles no conocidos.
  • Ancho, altura, profundidad
  • 213 x 134 x 422 mm / 8.4 x 5.3 x 16.6 inch
  • Anotaciones
  • The 4261A is a component test instrument to measure capacitance, inductance, resistance and dissipation factor automatically. The measuring range for capacitance is from 0.1pF to 19mF, inductance from 0.1µH to 1900H, and resistance from 1 mΩ to 19 MΩ.

    Basic accuracy 0.2% to 0.3% depending on test signal level, frequency and measuring equivalent circuit. Typical measuring speed 200 milliseconds.

    Test frequencies 120Hz and 1kHz. Five-terminal connection between component and instrument.

    Analogue circuitry (npn, pnp, j-fet, mos-fet, linear) used in combination with digital circuitry (TTL, LS-TTL). No microprocessor used.

    Das 4261A ist ein Komponententester, der Kapazitäten, Induktivitäten, Widerstände und Verlustfaktoren automatisch misst. Die Messbereiche reichen für Kapazitäten von 0,1pF bis 19mF, Induktivitäten von 0,1µH bis 1900H und Widerstände von 1 Milliohm bis 19 Megohm.

    Die Grundgenauigkeit beträgt 0,2% bis 0,3% abhängig von Messsignalpegel, Messfrequenz und Vergleichsschaltung. Typischer Messzyklus 200 Millisekunden.

    Die Messfrequenzen betragen 120Hz und 1kHz. Anschlussschaltung mit 5 Anschlüssen zur Komponentenmessung.

    Verwendet wurden Analogschaltkreise (npn, pnp, j-fet, mos-fet, linear) in Kombination mit Digitalschaltkreisen (TTL, LS-TTL). Kein Mikrozessor verwendet.

  • Peso neto
  • 7.5 kg / 16 lb 8.3 oz (16.52 lb)
  • Mencionado en
  • - - Manufacturers Literature (HP Journal September 1976, vol. 28, no. 1, pp. 9-16)
  • Documentación / Esquemas (1)
  • -- Original-techn. papers.
  • Autor
  • Modelo creado por Thomas Wuwer. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Digital LCR Meter es parte de las colecciones de los siguientes miembros.

 Forum