Four Valve Regenerative Receiver RFS-01

Homebrew - RECENT - but NOT Replica; España

  • Year
  • 2019
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 315618

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 4
  • Main principle
  • TRF with regeneration; 2 AF stage(s)
  • Tuned circuits
  • 2 AM circuit(s)
  • Wave bands
  • Broadcast only (MW).
  • Power type and voltage
  • Alternating Current supply (AC) / 220-240 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 2.5 inch = 6.4 cm
  • Power out
  • 0.12 W (max.)
  • Material
  • Wooden case, TUBES VISIBLE.
  • from Radiomuseum.org
  • Model: Four Valve Regenerative Receiver RFS-01 - Homebrew - RECENT - but NOT
  • Shape
  • Tablemodel, Box - most often with Lid (NOT slant panel).
  • Dimensions (WHD)
  • 350 x 160 x 230 mm / 13.8 x 6.3 x 9.1 inch
  • Notes
  • This project started not only for fun, also as an exercise to test the capabilities of early radio receivers. Being surprised with the performance, then decide to realize this model following the aesthetics of early radio equipment, using antique components wherever was possible.
    This two-step tuned receiver with regeneration, has lower sensitivity but almost similar selectivity and better noise rejection than standard superhet receivers.
     

    Acknowledgments
    Special thanks to my friend Dr. Ricard Morrón. His outstanding knowledge on early radio technologies, enthusiasm and contribution with vintage components has been essential in executing this project.

  • Net weight (2.2 lb = 1 kg)
  • 6.8 kg / 14 lb 15.6 oz (14.978 lb)
  • Literature/Schematics (1)
  • -- Schematic

 Collections | Museums | Literature

Collections

The model Four Valve Regenerative Receiver is part of the collections of the following members.

 Forum