radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

Stereo Console Amplifier PM700 DC PM700

Stereo Console Amplifier PM700 DC PM700; Marantz Sound United (ID = 434987) Ampl/Mixer Stereo Console Amplifier PM700 DC PM700; Marantz Sound United (ID = 434988) Ampl/Mixer
Use red slider bar for more.
Stereo Console Amplifier PM700 DC PM700; Marantz Sound United (ID = 434987) Ampl/Mixer
Marantz Sound United: Stereo Console Amplifier PM700 DC PM700 [Ampl/Mixer] ID = 434987 900x424
Select picture or schematic to display from thumbnails on the right and click for download.
For model Stereo Console Amplifier PM700 DC PM700, Marantz (Sound United LLC); Vista, CA
 
Country:  United States of America (USA)
Manufacturer / Brand:  Marantz (Sound United LLC); Vista, CA
Year: 1980/1981 Category: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) Semiconductors present.
Main principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 110; 120; 220; 240 Volt
Loudspeaker - This model requires external speaker(s).
Power out 140 W (176 W max.)
from Radiomuseum.org Model: Stereo Console Amplifier PM700 DC PM700 - Marantz Sound United LLC;
Material Metal case
Shape Book-shelf unit.
Dimensions (WHD) 416 x 146 x 330 mm / 16.4 x 5.7 x 13 inch
Notes

A hi-fi stereo integrated amplifier with output power of 70 watts FTC per channel into 8 ohms or 88 watts FTC per channel into 4 ohms housed in a metal case (wooden side panels optional). With a 5 band graphic equalizer (50Hz, 200Hz, 800Hz, 3.2kHz,12.8kHz), Left and Right channel LED bar peak power indicators, rotary Balance and Volume controls, rotary switches for Selector (Phono (MC), Phono (MM1), Phono (MM2), Tuner, Tape3/Aux) and Tape Copy (1⇾2, 2⇾1, Off), push button switches for Tape Monitor 1 and 2, Low and High Filters, Mono, Equalizer Defeat, Loudness, Speakers 1 and/or 2 and a jack for Headphones. On the back, RCA phono sockets for input Phono1 (MM), Phono2 (MM/MC), Tuner and Tape3/Aux, for input/output Tape1 and Tape2 monitors, DIN sockets for Tape1 and Tape2 Monitors Rec/PB, and terminals for two pairs of loudspeakers.

Specification 
Power Output Per channel into 8Ω70W (FTC), 80W (DIN)
  Total Harmonic Distortion0.03%
  I.M. Distortion0.03%
Power Output Per channel into 4Ω88W (FTC), 100W (DIN)
  Total Harmonic Distortion0.06%
  I.M. Distortion0.06%
Power Bandwidth10Hz-70kHz
Damping Factor (8Ω)110
Frequency Response 
  Phono (RIAA)
  Aux
±0.25 dB
10Hz-60kHz, ±1dB
Signal-to-Noise Ratio (IHF-A Network) 
  Phono (MC)
  Phono (MM)
  Aux
78dB
88dB
93dB
Input Terminals 
  Phono Input 
    Impedance
    Capacitance
    Sensitivity
47kΩ
220pF
0.33mV
  Aux Input 
    Impedance
    Sensitivity
25kΩ
18mV
Phono Equivalent Input Noise0.38µV
Phono Dynamic Range112dB
Channel Balance (0 to -40dB/40Hz-16kHz) 
  Phono
  Aux
2.0dB
1.6dB
Interchannel Crosstalk 
  Phono 1kHz
  Aux  1kHz
  Tape 1kHz
50dB
65dB
65dB
Intersource Crosstalk (Worst Point), 1kHz58dB
Output Voltage/Impedance, 1kHz415mV/220Ω

Semiconductors: 54 transistors, 66 diodes, 9 ICs

Versions/Power Requirements

U,C120V AC
T,A220/240V AC with voltage selector
N,P110/120/220/240V AC with voltage selector

Power Consumption: 300W ±20W

Designed in USA, Produced in Japan

Stereo-Verstärker. Eingebauter Equalizer mit 5-Kanälen pro Ausgang. LED-Aussteueranzeige. Eingänge:2x Phono, Tuner, Aux, 2x Tape. Vier Lautsprecherausgänge.

Net weight (2.2 lb = 1 kg) 10 kg / 22 lb 0.4 oz (22.026 lb)
Source of data - - Data from my own collection
Mentioned in -- Original prospect or advert (1980 & 1981 Marantz Hi-Fi catalogues)
Literature/Schematics (1) - - Manufacturers Literature (Service manual PM500/PM700)

Model page created by Peter Böhm. See "Data change" for further contributors.



All listed radios etc. from Marantz (Sound United LLC); Vista, CA
Here you find 539 models, 530 with images and 84 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.




  
rmXorg