106 Receiver 2nd version 8 Binding Posts

• alternative name: American Marconi || Marconi, American
• Brand: Marconiphone

Production of the Marconi 106 continued at the Marconi Aldene plant in New Jersey until late 1919 when Marconi was absorbed into RCA. The 106 was equipped with two types of crystal detectors. A cerusite crystal and a carborundum. The cerusite was somewhat more sensitive but the carborundum was more stable in shipboard applications. The appropriate detector material for existing conditions was then placed in the single detector crystal holder mounted on the front panel of the receiver.

The first design changes to the 106 came in mid-1915. These changes included replacing the buzzer with a two screw cover buzzer with a new buzzer with a twist off cover and adding a fourth binding post to the right side of the detector. This added binding post allowed the operator to reverse bias the carborundum detector without disturbing the buzzer circuit. The twist cover on the buzzer allowed the operator to easily remove the buzzer cover for buzzer adjustments.

The 2nd version still had all 8 binding post along the lower bottom of the front panel. Two pairs were located to the left of the detector and three more located to the right. The first four pairs were assigned 1-4 but the bottom of the detector was assigned number 5. The four posts to the right of the detector were then assigned  6 ,7, 8 and 9. 

All 106 receivers covered the 200-3500 meter wave lengths and were used primarily for marine applications.

Vous pourrez trouver sous ce lien 43 modèles d'appareils, 42 avec des images et 3 avec des schémas.
Tous les appareils de Marconi Wireless Telegraph Co. of America