• País
• Gran Bretaña (GB)

• Fabricante / Marca
• Marshall (Brand), Marshall, J & T, (Musical Instruments) Ltd.; Hanwell & Bletchley

• Año
• 2013 ?

• Categoría
• Bluetooth-Receiver and -Speaker

• Radiomuseum.org ID
• 370631

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

• Numero de transistores
• Hay semiconductores.

• Semiconductores

• Principio principal
• Amplificador de Audio

• Gama de ondas
• - no hay

• Tensión de funcionamiento
• Red: Corriente alterna (CA, Inglés = AC) / 100-240 Volt

• Altavoz
• Altavoz dinámico (de imán permanente) / Ø 6 inch = 15.2 cm

• Potencia de salida
• 50 W (unknown quality)

• Material
• Materiales diversos

• de Radiomuseum.org
• Modelo: Stanmore Speaker Bluetooth M-001 - Marshall Brand, Marshall, J &

• Forma
• Sobremesa alto de forma simple.

• Ancho, altura, profundidad
• 350 x 185 x 185 mm / 13.8 x 7.3 x 7.3 inch

• Anotaciones

• Early production of the Marshall Stanmore (Type M‑001) was carried out by Kaga Hightech Co. Ltd., Tokyo, Japan — a major OEM/ODM manufacturer within the Kaga Electronics Group,

  Sound Specification

  • Active stereo loudspeaker with bass reflex system
  • Digital Class‑D amplifier: 2 × 20 W + 1 × 40 W
  • ¾″ dome tweeters: 2 ×
  • 5 ¼″ woofer: 1 ×
  • Bass and treble tone controls
  • Frequency response: 45 – 22 000 Hz ± 3 dB
  • Crossover frequency: 2 500 Hz
  • Connectivity:
    • Bluetooth V4.0 + EDR aptX® codec
    • Input 1 – 3.5 mm jack × 1
    • Input 2 – RCA × 1
    • Optical input × 1
  • Maximum power output: 80 W RMS

  The Marshall Stanmore (Type M‑001) was introduced in 2013 as the mid‑sized model of Zound Industries’ Marshall‑branded home‑audio line. Early production was carried out by Kaga Hightech Co. Ltd., Japan, whose rear‑panel marking appears on the first manufacturing run; these units feature the original amplifier layout and include an optical (TOSLINK) input, later removed in subsequent revisions. Around 2015–2016 production shifted to China, with minor internal cost‑reduction changes, revised rear‑label formats, and slightly reduced cabinet weight, while maintaining the same acoustic tuning and Bluetooth 4.0 + aptX platform. The Stanmore was later superseded by the Stanmore II (2018) and Stanmore III (2022), both redesigned with updated DSP, Bluetooth 5.x, and new cabinet construction, but without the optical input found only on the earliest Type M‑001 versions.

• Peso neto
• 5.1 kg / 11 lb 3.7 oz (11.233 lb)

• Mencionado en
• - - Manufacturers Literature

• Autor
• Modelo creado por Toni Gutiérrez García. Ver en "Modificar Ficha" los participantes posteriores.

• Otros modelos

• Donde encontrará 22 modelos, 20 con imágenes y 6 con esquemas.
  Ir al listado general de Marshall (Brand), Marshall, J & T, (Musical Instruments) Ltd.; Hanwell & Bletchley