Crystal Calibrator 111-B

Measurements Corporation, Boonton NJ

  • Année
  • 1956 ??
  • Catégorie
  • Appareils de mesure et de dépannage (matériel de labo)
  • Radiomuseum.org ID
  • 116112

 Spécifications techniques

  • No. de tubes
  • 5
  • Gammes d'ondes
  • Bandes en notes
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 117 Volt
  • Haut-parleur
  • - - Pas de sortie basse fréquence
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: Crystal Calibrator 111-B - Measurements Corporation,
  • Forme
  • Modèle de table générique
  • Dimensions (LHP)
  • 6 x 9.6 x 5.4 inch / 152 x 244 x 137 mm
  • Remarques
  • Calibrator with three crystal controlled oscillators, 0.1, 1 and 10 MHz. Generates harmonics from 0.1 to 1000 MHz.

    Very useful for calibrating BC band radio's since this oscillator generates accurate harmonics that are crystal oscillator based.  With the output (RCA connector) connected to the radio antenna and the radio set to the BC band, set the calibrator to the 1MHz band and verify signal when radio dial is set to 1MHz.  Then switch calibrator to 100kHz, set radio dial to 600kHz and adjust radio padder for loudest signal, then move radio dial to 1500kHz and adjust for loudest signal.

  • Poids net
  • 1.9 kg / 4 lb 3 oz (4.185 lb)
  • Schémathèque (1)
  • The Radio Electronic Master, 1956
  • Auteur
  • Modèle crée par Emilio Ciardiello. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle Crystal Calibrator fait partie des collections des membres suivants.

 Forum