• Année
  • 1920
  • Catégorie
  • Module radio avant 1926 (pas un composant ni clavier)
  • Radiomuseum.org ID
  • 192377

 Spécifications techniques

  • Principe général
  • Circuit d'accord d'avant 1926 (pas de circuits bouchon)
  • Circuits accordés
  • 2 Circuits MA (AM)
  • Gammes d'ondes
  • PO et GO
  • Tension / type courant
  • Pas d'alimentation nécessaire
  • Haut-parleur
  • - - Pas de sortie basse fréquence
  • Matière
  • Boitier en bois
  • De Radiomuseum.org
  • Modèle: RC2 - Mignon Wireless Corp., Elmira,
  • Forme
  • Modèle de table boitier avec vouvercle
  • Dimensions (LHP)
  • 12.5 x 9.5 x 6 inch / 318 x 241 x 152 mm
  • Remarques
  • The RC2 was equipped with a duplex vario-coupler. Two separate hardwood rings, 7 inches in diameter, are employed, each containing primary and secondary windings. These rings are stationary and placed inductively to each other. Both primaries as well as secondaries are connected in series and are of equal capacities. The first primary has fourteen more terminals than the second one, permitting a more gradual and most accurate tuning. Both coils are wound with No. 32 double silk covered copper wire. The combination of the duplex vario-coupler equals the variation of the ordinary loose coupler and wonderful results have been obtained. Wave Length capacity of this instrument is 6,500 meters. There are six terminals on the front panel. Antennae, ground, detector pair and headphones pair.
  • Prix de mise sur le marché
  • 25.00 $
  • Schémathèque (1)
  • 1920 William Duck Catalog #14 page30.
  • Auteur
  • Modèle crée par Alan Larsen. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum