Crystal holder - Quartz - Quarz FT243

MILITARY U.S. (different makers for same model)

  • Année
  • 1943–1964 ?
  • Catégorie
  • Pièce de radio / composant (pas un module)
  • Radiomuseum.org ID
  • 125717

 Spécifications techniques

  • Matière
  • Matériel spécial, décrit dans les notes
  • De Radiomuseum.org
  • Modèle: Crystal holder - Quartz - Quarz FT243 - MILITARY U.S. different makers
  • Forme
  • Formes diverses décrites en notes
  • Dimensions (LHP)
  • 21 x 29 x 11 mm / 0.8 x 1.1 x 0.4 inch
  • Remarques
  • Steckquarze in Duroplastgehäusen, z.T. mit Metallfrontplatte, Frequenzbereich ca. 1 - 10 MHz, Kanalquarze f. Militär-Geräte, überwiegend in den USA produziert.

    Crystal Holder, 2 pins, spaced 0.486" (12.3 mm) and pin diameter 0.093" (2.4 mm), pin length 3/8" (9.5 mm).
  • Poids net
  • 0.018 kg / 0 lb 0.6 oz (0.04 lb)
  • Auteur
  • Modèle crée par Hans-Peter Bölke. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle Crystal holder - Quartz - Quarz fait partie des collections des membres suivants.

 Forum

Contributions du forum pour ce modèle: MILITARY U.S.: Crystal holder - Quartz - Quarz FT243

Discussions: 1 | Publications: 4

The left x-tal is not a FT-243, but similar and it can be used in a BC-620 with 79 channels, 100 kHz separated, in the range 20,0-27,9 MHz. These FT-243 x-tals are numbered after their channel,  so channel no.65 means the fundamental frequency of 7873,3 kHz multiplied by 3 + the IF frequency of 2880 kHz, giving  a working frequency of 26500 kHz.

The middle and right x-tals were used in the BC-659 and BC-1335 with 120 channels, 100 kHz  separated, in the range 27,0-38,9 MHz. These x-tals are numbered after their working frequency, devided by 100, so channel 292 means the fundamental frequency of 6225 kHz multiplied by 4 + the IF frequency of 4300 kHz, giving a working frequency of 29200 kHz.

Jan Terranea, 17.Jun.10

Weitere Posts (4) zu diesem Thema.