Twin Power Supply LABPAC B602D

Oltronix AB; Vällingby

  • Year
  • 1978 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 247286

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • none
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 220 Volt
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Twin Power Supply LABPAC B602D - Oltronix AB; Vällingby
  • Shape
  • Tablemodel, with any shape - general.
  • Dimensions (WHD)
  • 176 x 176 x 255 mm / 6.9 x 6.9 x 10 inch
  • Notes
  • Twin voltage power supply with DIGITAL SETTING

    output 1: 0- 60 V at 0.7 A
    output 2: 0 - 30 V at 1.4 A

    • The output voltages are fully independent and separated from each other. The isolation voltage among them and against the instrument case is ± 500V DC and may be applied for continuous operation

    • DIGITAL SETTING and readout of the output voltages with an accuracy of ±0.3% by means of a 10-turn precision potentiometer. This, in many cases, is
    a valid substitute for an extra DVM measuring the output voltage

    • Adjustable current limits from 5% to 105% of the nominal current
    • Low source and load effect, low PARD (ripple and noise)
    • Short circuit protected
    • Overvoltage protection limits the max. output voltage of the 0 - 6 V range to 7V. Its operation is displayed by a LED

    • Switchable volt /ampere-meters
    • Operating mode indicated by LED's: constant voltage or constant current
    • Mains transformer with overtemperature protection (OTP)
     

  • Net weight (2.2 lb = 1 kg)
  • 5.3 kg / 11 lb 10.8 oz (11.674 lb)
  • Mentioned in
  • -- Original prospect or advert
  • Author
  • Model page created by Pius Steiner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum