Palec 2" Cathode Ray Oscillograph CJ
Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- Paese
- Australia
- Produttore / Marca
- Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- Anno
- 1938
- Categoria
- Strumento da laboratorio
- Radiomuseum.org ID
- 316596
- Gamme d'onda
- - senza
- Tensioni di funzionamento
- Alimentazione a corrente alternata (CA) / 200-250 Volt
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: Palec 2" Cathode Ray Oscillograph CJ - Paton Electrical Pty. Ltd.
- Forma
- Soprammobile verticale (sviluppato in altezza; no cattedrale, sin decorazioni).
- Dimensioni (LxAxP)
- 8.5 x 9.5 x 12 inch / 216 x 241 x 305 mm
- Annotazioni
-
Audio Frequency, 2” Cathode Ray Oscillograph
SCREEN:
Diameter of surface 2 Inches (Type 902). 2 ¾” screen 30/- extra. 2.SWEEP CIRCUIT:
Employs a special Linear Sweep Oscillator to cover a range from 30 to 30,000 cycles. Synchronisation can be selected from either the Y plate, 50 cycles, or from an external source.CONTROLLABLE AMPLIFIERS:
Can be put in on both the X and Y plates. The Y plate amplifier (normally used) is designed to have a high gain and to be flat over the audio range.Price plus tax.
CONTROLS:
Are all placed conveniently on the front panel and include, in addition to those outlined above, Vertical and Horizontal Shifts, Focus and Intensity.
- Prezzo nel primo anno
- 21.00 AUS £
- Bibliografia
- Wireless Weekly (Australia) (Wireless Weekly Dec 16, 1938, Page 28.)
- Autore
- Modello inviato da Gary Cowans. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 49 modelli, di cui 38 con immagini e 3 con schemi.
Elenco delle radio e altri apparecchi della Paton Electrical Pty. Ltd.(Palec); Sydney NSW