Current Clamp Adapter - Zangenadapter - Stromzange P 4250
PeakTech GmbH, Heinz-Günther Lau (HGL, H.G.L., Exacta); Ahrensburg
- País
- Alemania
- Fabricante / Marca
- PeakTech GmbH, Heinz-Günther Lau (HGL, H.G.L., Exacta); Ahrensburg
- Año
- 2010 ??
- Categoría
- Aparato de medida y servicio (Equipo de laboratorio).
- Radiomuseum.org ID
- 357068
- Numero de transistores
- Hay semiconductores.
- Semiconductores
- Gama de ondas
- - no hay
- Tensión de funcionamiento
- Pilas / PP3: 1 x 9 Volt
- Altavoz
- - - No hay salida de sonido.
- Material
- Plástico moderno (Nunca bakelita o catalina)
- de Radiomuseum.org
- Modelo: Current Clamp Adapter - Zangenadapter - Stromzange P 4250 - PeakTech GmbH, Heinz-Günther
- Forma
- Portátil de bolsillo , menor de 20cm.
- Ancho, altura, profundidad
- 195 x 70 x 33 mm / 7.7 x 2.8 x 1.3 inch
- Anotaciones
-
In combination with a multimeter, the PeakTech P 4250 Current Clamp Adapter enables in-circuit non-contact measurements of currents up to 60 A. The instrument has two ranges and is powered by a 9 V PP3 battery, which has a life of about 100 hours.
Output 1 mV/10 mA; 1 mV/100 mA
Maximum current DC or AC 60 A
Frequency range 0 - 20 kHz
Zero set switch for DC current measurement
Load resistance 10 kΩ typical
Max conductor diameter 9 mm
4 mm safety plug connectors
Power on (green) and low battery (red) LEDs
Overvoltage category II (Max 300 V DC or 240 V AC)
Operating environment 0 to 50 ˚C at < 70% RH
Storage environment -20 to 60 ˚C at < 80% RH
- Peso neto
- 0.244 kg / 0 lb 8.6 oz (0.537 lb)
- Mencionado en
- - - Manufacturers Literature (Operation manual)
- Autor
- Modelo creado por Bruce Taylor. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 17 modelos, 15 con imágenes y 4 con esquemas.
Ir al listado general de PeakTech GmbH, Heinz-Günther Lau (HGL, H.G.L., Exacta); Ahrensburg
Colecciones
El modelo Current Clamp Adapter - Zangenadapter - Stromzange es parte de las colecciones de los siguientes miembros.