CD Radio Cassette Recorder AZ1010 /10

Philips 飞利浦; China

Data
Forum
Pictures
Collections

  • Year
  • 1997 ??
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 360681

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Superhet with RF-stage; ZF/IF 468/10700 kHz
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Details
  • Other Combination - see Notes
  • Power type and voltage
  • Line / Batteries (any type) / 50-60 Hz, 230-240 / D: 6 x 1.5 Volt
  • Loudspeaker
  • 2 Loudspeakers / Ø 4 inch = 10.2 cm
  • Material
  • Plastics (no bakelite or catalin)
  • from Radiomuseum.org
  • Model: CD Radio Cassette Recorder AZ1010 /10 - Philips 飞利浦; China
  • Shape
  • Portable set > 8 inch (also usable without mains)
  • Dimensions (WHD)
  • 17.4 x 6.8 x 6.1 inch / 442 x 173 x 155 mm
  • Notes

  • For Australia/New Zealand

    Amplifier: 

    -Power stage protection: temperature and shortcircuit 
    -Output power:

    • mains : 2 x 1,4Wrms -1dB at 4Ω D=10% 
    • battery : 2 x 2Wrms -1dB at 4Ω D=10% 

    -Headphone: 3.5mm stereo jack, ≥20mW at 32Ω (≡0.8V at 32Ω) D=10% 
    -Frequency response: 30Hz - 16kHz (typ. at volume set to -20dB, CD mode 0dB signal level ⇒use SBC429) 
    -Tone control DBB: +12dB ±3dB at 100Hz (volume set to -20dB) 

    Tuner:  

    -Tuning range :

    • FM 87.5 - 108 MHz 
    • MW 522 - 1607 kHz (520 - 1730 kHz for /17) 

    -Intermediate Frequency: 

    • FM 10,7 MHz ± 20 kHz 
    • MW 468 kHz ± 3 kHz 

    -Sensitivity, Mono: 26dB S/N, m=30% 

    • FM ≤4 μV (≤ μV typ.) 
    • MW ≤4mV/m (≤1.5mV/m typ.) 

    -Sensitivity, FM: -3 dB limiting point ≤5 μV (≤2μV typ.) 
    -AFC capture range, FM:  ±300kHz typ.
    -Distortion: 

    • FM:  ≤7% (≤1% typ.) RF=1mV Δf=75kHz² 
    • MW: ≤7% (≤2,5% typ.) RF=100mV/m m=80% 

    -Image rejection ratio:

    • FM: ≤20dB (26dB typ.) 
    • MW: ≤28dB

    -Channel separation at 1kHz, FM: ≤20dB (25dB typ.) 

    Compact Disc: To be measured on phone socket with 100kW load:

    -Frequency response: 30 - 16.000 Hz -4dB 
    -Signal/Noise ratio: ≥60dB 
    -Distortion: 0.2% typ. at 1 kHz 
    -Channel difference: ≤3dB at 1 kHz 
    -Channel crosstalk: 40dB typ.
    -De emphasis: 0 or 15/50μs switched automatically by subcode on the disc 
    -Laser: 

    • Output power: 500μW 
    • Wave length: 780 ± 20 nm 

    Recorder: To be measured on phone socket with 100kW load.

    -Tape speed: 4,76cm/s ±3% 
    -Wow & Flutter: ≤0,5% weighted 
    -Winding speed: 120s for C60 cassette
    -Erase / Bias system: permanent magnetic erase head / AC 65 ±5kHz 
    -Distortion at 250 nWb/m: ≤7% 
    -Signal/Noise ratio:

    • (FF weighted): ≥40dB 
    • (A - weighted): ≥43dB 

    -Channel difference at PB: ≤5dB
    -Channel difference overall: ≤5dB 
    -Channel separation: ≤15dB at 1kHz 
    -Track separation: ≤55dB at 1kHz 
    -Frequency response IEC I:

    • Pb: 125Hz - 8000Hz (within 8dB) 
    • overall  250Hz - 6300Hz (within 8dB)

    See also:
    AZ1010 /00 (50Hz, 220-230V)
    AZ1010 /01 (50-60Hz, 110-127; 220-230V)
    AZ1010 /04 (50Hz, 220-230V)
    AZ1010 /05 (50Hz, 230-240V, United Kingdom)
    AZ1010 /10 (50Hz, 230-240V, Australia/New Zealand)
    AZ1010 /11 (50-60Hz, 110-127; 220-230V)
    AZ1010 /11H (50-60Hz, 110-127; 220-230V)
    AZ1010 /14 (50Hz, 220-230V)
    AZ1010 /17 (60Hz, 120V, Magnavox US)

  • Literature/Schematics (1)
  • -- Original-techn. papers. (Service Manual, 4822 725 26015)
  • Author
  • Model page created by Martin Kent. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum