Sound Processor CA-X7

Pioneer Corporation; Tokyo

  • Année
  • 1982 ?
  • Catégorie
  • Amplificateur BF ou mélangeur BF
  • Radiomuseum.org ID
  • 368898

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de transistors
  • Semi-conducteurs présents
  • Semi-conducteurs
  • Principe général
  • Amplification audio
  • Gammes d'ondes
  • - sans
  • Particularités
  • Equipement HIFI
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 60 Hz, 120 Volt
  • Haut-parleur
  • - Pour casque ou amplificateur BF
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: Sound Processor CA-X7 - Pioneer Corporation; Tokyo
  • Forme
  • Appareil d'étagère
  • Dimensions (LHP)
  • 320 x 98 x 222 mm / 12.6 x 3.9 x 8.7 inch
  • Remarques
  • The Pioneer CA‑X7 is a sound processor and graphic equalizer introduced in the early 1980s as part of the Pioneer S‑99 system family. It was designed to complement the A‑X9 amplifier, F‑X9 tuner, CT‑X9 cassette deck and other components in the coordinated S‑99 series, sharing the same styling and system‑control architecture. The unit provides multi‑band tone shaping and signal conditioning functions intended to offer a wider range of adjustment than the standard tone controls available on the matching amplifier.

    Specifications
    Input (Sensitivity / Impedance)

    • Processor Input, Tape Play: 150 mV / 50 kΩ
    • CH‑1, CH‑2 (Mic‑Low): 0.3 mV / 10 kΩ
    • CH‑1, CH‑2 (Mic‑High): 1.5 mV / 10 kΩ
    • CH‑1, CH‑2 (Instrument): 75 mV / 50 kΩ

    Overload Level (1 kHz)

    • Processor Input, Tape Play: 5 V (THD 0.1%)
    • CH‑1, CH‑2 (Mic‑Low): 25 mV (clip level)
    • CH‑1, CH‑2 (Mic‑High): 120 mV (clip level)
    • CH‑1, CH‑2 (Instrument): 10 V (clip level)

    Output (Level / Impedance)

    • Processor Output: 150 mV / 1 kΩ
    • Tape Rec: 150 mV / 3 kΩ

    Total Harmonic Distortion (1 kHz, 1 V)

    • Line (Graphic Equalizer ON/OFF): 0.008%
    • CH‑1, CH‑2: 0.05%

    Frequency Response

    • Line: 10 Hz – 80 kHz, ±0–3 dB CH‑1,
    • CH‑2: 20 Hz – 10 kHz, ±0–3 dB
    • Low‑Cut Filter: 160 Hz (–3 dB)

    Graphic Equalizer Frequencies
    60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz, 15 kHz

  • Poids net
  • 2.8 kg / 6 lb 2.7 oz (6.167 lb)
  • Littérature
  • - - Manufacturers Literature
  • Auteur
  • Modèle crée par Harald Sakshaug. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle Sound Processor fait partie des collections des membres suivants.

 Forum