Stereo Amplifier SA-420

Pioneer Corporation; Tokyo

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 1981
  • Kategorie
  • NF-(Niederfrequenz-) Verstärker oder -Mixer
  • Radiomuseum.org ID
  • 321860

 Technische Daten

  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Halbleiter
  • Hauptprinzip
  • NF-Verstärkung
  • Wellenbereiche
  • - ohne
  • Spezialitäten
  • Hi-Fi-Gerät
  • Betriebsart / Volt
  • Wechselstromspeisung / 110; 120; 220; 240 Volt
  • Lautsprecher
  • - Dieses Modell benötigt externe(n) Lautsprecher.
  • Belastbarkeit / Leistung
  • 42 W (sinus/unverzerrt)
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Stereo Amplifier SA-420 - Pioneer Corporation; Tokyo
  • Form
  • Regalgerät wie HiFi-Komponente für Bücherwand.
  • Abmessungen (BHT)
  • 420 x 94 x 267 mm / 16.5 x 3.7 x 10.5 inch
  • Bemerkung

  • A stereo hi-fi integrated amplifier with output power of 21 watts per channel into 8 ohms. RCA phono sockets for input Phono, Tuner and Aux/Video, RCA phono Rec/Play sockets for Tape/Adaptor, RCA phono output sockets for headphones, terminals for 2 pairs of loudspeakers and 3 AC outlets. Rotary Bass and Treble tone controls, push button switches for Loudspeakers (A,B), Tape/Adaptor and Loudness and a jack for headphones. 

    Specification  
    Power Output Continuous power output of 21 watts
    per channel min. into 8Ω
    from 30 Hz to 20,000 Hz
    with no more than 0.1% THD
    Total Harmonic Distortion
    (30Hz to 20,000Hz, 8Ω, from AUX)
    10 watts per channel power output    		 No more than 0.05%
    Intermodulation Distortion
    (8Ω, from AUX)    		  
      Continuous rated power output
     10 watts per channel power output    		 No more than 0.2%
    No more than 0.08%
    Damping Factor (20Hz-20,000Hz, 8Ω) 30
    Input (Sensitivity/Impedance)
     
     
         		 PHONO 2.5mV/50 kΩ
    TUNER 150mV/50 kΩ
    AUX   150mV/50 kΩ
    TAPE PLAY/ADAPTOR 150mV/50 kΩ
    Output Level  
      TAPE REC/ADAPTOR
      Speaker    		 150mV
    A, B, OFF
    Frequency Response  
      PHONO (RIAA Equalization)
      TUNER, AUX, TAPE PLAY/ADAPTOR    		 30Hz - 15,000Hz ±0.5dB
    10Hz - 60,000Hz ±3dB
    Hum and Noise
    (IHF, short-circuited, A network)    		 PHONO  72dB
    TUNER, AUX, TAPE PLAY/ADAPTOR  97dB

    Versions/Power requirements

    KU U.S.A. model  120V only
    YP Australia model 240V only
    HE Europe model  220V and 240V (Internally switchable)
    HB United Kingdom model 220V and 240V (Internally switchable)
    S General export model 110V, 120V, 220V and 240V (voltage selector)

    Power consumption :  60 watts

  • Nettogewicht
  • 4.6 kg / 10 lb 2.1 oz (10.132 lb)
  • Literaturnachweis
  • -- Original prospect or advert (1981-82 Pioneer Hi-Fi Stereo catalogue)
  • Literatur/Schema (1)
  • - - Manufacturers Literature (Service manual SA-420 dated Apr 1981)
  • Autor
  • Modellseite von Howard Craven angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum