Stereo Amplifier SA-5300

Pioneer Corporation; Tokyo

  • Jahr
  • 1974–1977
  • Kategorie
  • NF-(Niederfrequenz-) Verstärker oder -Mixer
  • Radiomuseum.org ID
  • 249142

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Halbleiter
  • Hauptprinzip
  • NF-Verstärkung
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Wechselstromspeisung / 220; 110/120/130/220/240 Volt
  • Lautsprecher
  • - Dieses Modell benötigt externe(n) Lautsprecher.
  • Belastbarkeit / Leistung
  • 20 W (sinus/unverzerrt)
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Stereo Amplifier SA-5300 - Pioneer Corporation; Tokyo
  • Form
  • Regalgerät wie HiFi-Komponente für Bücherwand.
  • Abmessungen (BHT)
  • 350 x 125 x 282 mm / 13.8 x 4.9 x 11.1 inch
  • Bemerkung
  • A hi-fi stereo amplifier housed in a metal case with continuous power output of 10 watts per channel min. RMS into 8Ω, 40Hz — 20,000Hz, with no more than 0.8% total harmonic distortion. Terminals for two pairs of loudspeakers (A, B), jack for headphones.

    Specification  
    Continuous Power Output
    (Both channels driven)
     
     40Hz — 20kHz
     
    10W + 10W into 8Ω
    10W + 10W into 4Ω
     1kHz
     
    12W + 12W into 8Ω
    14W + 14W into 4Ω
    THD (40Hz — 20kHz)
    (Continuous Power Output)
    (1W Power Output, 8Ω)
     
    < 0.8%
    < 0.3%
    Intermodulation Distortion
    (Continuous Power Output)
    (1W Power Output, 8Ω)
     
    < 0.8%
    < 0.3%
    Power Bandwidth
    (IHF, Both channels driven)
    15Hz — 100kHz (THD 0.8%)
    Output:
    Speakers
    A, B (4Ω — 16Ω)
    A + B (8Ω — 16Ω)
    Headphone 4Ω — 16Ω
    Damping Factor
    (40Hz — 20kHz, 8Ω)
    > 30
    Inputs
    Sensitivity/Impedance
     
     PHONO
     TUNER
     AUX
     TAPE PB
     TAPE PB (DIN connector)
    2.5mV/50kΩ
    150mV/50kΩ
    150mV/50kΩ
    150mV/50kΩ
    150mV/50kΩ
    Outputs
    Level/Impedance
     
     TAPE REC
     TAPE REC (DIN connector)
    150mV
    30mV/80kΩ
    Frequency Response  
     PHONO (RIAA equalization)
     TUNER, AUX, TAPE PB
    30Hz — 15kHz ±0.5dB
    20Hz — 30kHz +0.5dB,-1dB
    Hum & Noise
    (IHF, Short circuited, A Network)
     
     PHONO
     TUNER, AUX, TAPE PB
    > 70dB
    > 85dB

    Semiconductors: 1 IC, 16 Transistors, 8 Diodes

    Versions/Power requirements
    GN  /  220V AC 50Hz
    FV  /  110/120/130/220/240V AC 50/60Hz with voltage selector

    Power consumption:  85 watts

  • Nettogewicht
  • 6.4 kg / 14 lb 1.6 oz (14.097 lb)
  • Literaturnachweis
  • - - Manufacturers Literature (1976-1977 Pioneer Hi-Fi Stereo catalogue)
  • Literatur/Schema (1)
  • - - Manufacturers Literature (Service manual Pioneer SA-5300 dated Dec 1974)
  • Autor
  • Modellseite von Bartosz Szwed angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Stereo Amplifier befindet sich in den Sammlungen folgender Mitglieder.

 Forum