Stereo Amplifier SA-5800

Pioneer Corporation; Tokyo

Dati
Forum
Immagini
Collezioni

  • Anno
  • 1979/1980
  • Categoria
  • Amplificatore audio o mixer audio
  • Radiomuseum.org ID
  • 334162

 Specifiche tecniche

  • Numero di transistor
  • 21
  • Semiconduttori
  • Principio generale
  • Amplificatore audio
  • Gamme d'onda
  • - senza
  • Particolarità
  • Hi-Fi equipment
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 120 Volt
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Potenza d'uscita
  • 50 W (indistorta)
  • Materiali
  • Mobile in legno
  • Radiomuseum.org
  • Modello: Stereo Amplifier SA-5800 - Pioneer Corporation; Tokyo
  • Forma
  • Apparecchio per ripiani a scaffale (come i componibili HiFi).
  • Dimensioni (LxAxP)
  • 451 x 151 x 271 mm / 17.8 x 5.9 x 10.7 inch
  • Annotazioni

  • A hi-fi stereo integrated amplifier housed in a wooden case with continuous power output of 2 x 25 watts into 8 ohms. With a fluorescent power meter display, Function selector switch (Tuner, Phono, Aux), Loudspeaker selector (A, B, A+B), Loudness and Subsonic filter switches, rotary controls for Volume, Bass, Treble and Balance, Tape Monitor switches (1,2), and a jack for headphones. On the back, RCA phono sockets for input Phono, Tuner and Aux and for input/output Tape1 and Tape2, terminals for two pair of loudspeakers and 3 AC outlets.

    Specification  
    Amplifier Section  
    Continuous Power output: 25 watts per channel into 8Ω
    from 20Hz to 20kHz
    with no more than 0.03% THD 
    25 watts per channel into 4Ω
    from 20Hz to 20kHz
    with no more than 0.05% THD
    lntermodulation Distortion
     8Ω from AUX    		 No more than 0.03%
    Output  
     Speaker
     Headphones    		 A, B, A+B  4-16Ω
    Low impedance
    Damping Factor (1kHz, 8Ω) 30
    Input (Sensitivity/Impedance)  
     PHONO
     TUNER
     AUX
     TAPE PLAY 1
     TAPE PLAY 2    		 2.5mV/47kΩ
    150mV/50kΩ
    150mV/50kΩ
    150mV/50kΩ
    150mV/50kΩ
    Output  
     TAPE REC 1
     TAPE REC 2    		 150mV
    150mV
    Frequency Response  
     PHONO (RIAA Equalization)
     TUNER, AUX, TAPE PLAY    		 30Hz-15kHz ±0.5dB
    20Hz-40kHz ±2dB
    Hum and Noise
    (IHF, short-circuited, A network)    		  
     PHONO
     TUNER, AUX, TAPE PLAY    		 76dB
    98dB

    Semiconductors: 3 ICs, 21 Transistors, 18 Diodes

    Versions/Power requirements
    KU USA model       /  120V AC 60Hz
    KC Canada model  /  120V AC 60Hz

    Power consumption:  75 watts

    Same as the Pioneer SA-508 Stereo Amplifier which is housed in a metal case.

  • Peso netto
  • 7.3 kg / 16 lb 1.3 oz (16.079 lb)
  • Bibliografia
  • - - Manufacturers Literature (1980 Pioneer Stereo Components catalogue)
  • Letteratura / Schemi (1)
  • - - Manufacturers Literature (Service Manual Pioneer SA-5800 SA-508 dated May 1979)
  • Autore
  • Modello inviato da Howard Craven. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum