Falcon P135
Pye (N.Z.) Ltd.; Waihi
- Fabricante / Marca
- Pye (N.Z.) Ltd.; Waihi
- Año
- 1982 ?
- Categoría
- Transmisor-Receptor comercial (no de Radioaficionado)
- Radiomuseum.org ID
- 362340
- Numero de transistores
- Hay semiconductores.
- Semiconductores
- Principio principal
- Transceiver
- Gama de ondas
- Bandas de recepción puestas en notas.
- Tensión de funcionamiento
- Bateria recargable / 12 Volt
- Altavoz
- - Este modelo usa altavoz exterior (1 o más).
- Material
- Metálico
- de Radiomuseum.org
- Modelo: Falcon P135 - Pye N.Z. Ltd.; Waihi
- Forma
- Chasis (tambien de autoradio)
- Anotaciones
-
PYE P135 Falcon Radio Telephone
The P135 Falcon Technical Manual provides the following summarized data:
Operation: A3 single or two-frequency simplex amplitude modulation.
Frequency Bands:
- P135L (Low Band): 81–88 MHz
- P135M (Mid Band): 94–108 MHz
- P135C (Aero Band): 118–136 MHz
- P135H (High Band): 151–156 MHz
Channel Spacing:
- P135L, P135M: 12 KHz
- P135C, P135H: 25 KHz
Switching Bandwidth:
- P135LC: ±1.5 MHz from tune frequency (Transmitter and Receiver)
- P135M/H: Transmitter -1 + 2 MHz, Receiver ±1.5 MHz from tune frequency
Channels: Single channel standard, up to six channels available.
Operating Temperature Range: -10°C to +50°C ambient.
Power Supply: 13.5V nominal DC, negative earth.
Current Consumption:
Receiver: 150 mA approx.
Transmitter: 3A approx.
Aerial Impedance: 50 ohms nominal.
Receiver Specifications:
- Sensitivity: Produces over 3 watts of audio with less than 30% modulation at 1 kHz for a -107dBm signal input. SINAD ratio is 16dB for -107dBm input (18dB typical).
- Signal-to-Noise Ratio (S/N): Greater than 45dB at -67dBm input.
Audio Output:
- 2 watts with an 8-ohm speaker.
- 3 watts with a 3-ohm speaker.
Image Rejection: 75dB.
Blocking: Less than 3dB reduction in S/N ratio with an interfering signal of -23dBm at 150 kHz from the tuned frequency.
Selectivity: Adjacent channel rejection of 90dB.
Mute: Electronically adjustable to less than -113dBm (0.5 uV p.d. ).
Automatic Gain Control (A.G.C.): 3dB change in audio output power for an input change from -107dBm to -21dBm.
Transmitter Specifications:
Power Output:
- 15W P135L
- 12W P135M
- 10W P135C
- 10W P135H
Spurious Output: Less than 2.5uW
Modulation Response: Within +0 - 3dBrelative to 1kHz from 400 Hz to 2.5 kHz.
Duty Cycle: Continuous transmit at 50°C, 50 Ohms load and normal supply voltage.
- Documentación / Esquemas (1)
- - - Manufacturers Literature
- Autor
- Modelo creado por Brian Stevens. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 102 modelos, 101 con imágenes y 65 con esquemas.
Ir al listado general de Pye (N.Z.) Ltd.; Waihi