ISB Adaptor RA-121 (RA-121A) (RA121A) UK version

Racal Engineering / Instruments / Electronics Ltd., Bracknell

  • Jahr
  • 1965 ??
  • Kategorie
  • Diverses (Sonstiges) - siehe Bemerkungen
  • Radiomuseum.org ID
  • 106386

 Technische Daten

  • Anzahl Röhren
  • 12
  • Hauptprinzip
  • ZF/IF 100/18 kHz
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Wechselstromspeisung / 100-125; 200-250 Volt
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: ISB Adaptor RA-121 [UK version] - Racal Engineering /
  • Form
  • Rack
  • Abmessungen (BHT)
  • 19 x 5.25 x 0 inch / 483 x 133 x 0 mm
  • Bemerkung
  • Independent Side Band Adaptor matching the RA-17 family receivers, allows reception of USB, LSB and ISB signals.
    The 100 kHz 3rd IF of the RA-17 is mixed with a 118 kHz oscillator signal for a new IF of 18 kHz. 18 kHz +/- 6 kHz bandpass filters separate the audio signal of the two sidebands, which are fed to separate audio frequency amplifiers.
    A CRT tube which produces a Lissajou figure is used for indication of correct tuning of receiver and adaptor tuning. Variants: RA-121B with US tubes and connectors, RA-121D with more stable crystal controlled 118 kHz oscillator.
  • Literaturnachweis
  • Racal Handbook, Rinus Jansen
  • Autor
  • Modellseite von Martin Bösch angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum