• Jahr
  • 1931 ?
  • Kategorie
  • Bausatz, Baukasten oder Bauanleitung (Kit)
  • Radiomuseum.org ID
  • 251562

 Technische Daten

  • Anzahl Röhren
  • 3
  • Hauptprinzip
  • Geradeaus oder Audion mit Rückkopplung; 1 NF-Stufe(n)
  • Anzahl Kreise
  • 1 Kreis(e) AM
  • Wellenbereiche
  • Langwelle, Mittelwelle (LW+MW).
  • Betriebsart / Volt
  • Akku und/oder Batterie / 2 & 9 & 60/100 Volt
  • Lautsprecher
  • Dynamischer LS, keine Erregerspule (permanentdynamisch)
  • Material
  • Gerät mit Holzgehäuse
  • von Radiomuseum.org
  • Modell: 303 - Ready Radio; Blackheath,
  • Form
  • Tischgerät, Hochformat (höher als quadratisch, schlicht, keine Kathedrale).
  • Bemerkung
  • Complete kit including "cellophane wrapped case". Article published in a Ready Radio magazine (price 6d, supplied free!) for Meteor SG3 and 303.

    Construction uses metal strips (brass?) under a "valve platform" sub-board (Bakelite?) with valve sockets mounted on a metal chassis. Almost like a PCB.

    There are no dates in the magazine of 303 & Meteor SG3, but the PM12A is referred to as new this season. Some sources claim Mullard PM12A released 1932. The Permanent Magnet Moving Coil speaker suggests 1930+ rather than 1929.

    LT: 2V Lead Acid Accumulator, recommended Block or Pertrix Accumulator PAC2 8s 6d.

    HT: 100V (perhaps really 99V) using 60 or 70, 90 & 100V taps. Or 60V pack (all HT = 60V). Pertrix Ultra Capacity HT 100V C/N 272 13s, or Pertrix yellow carton C/N 402 9s. See Winner 120GB (price shows Winner 99).

    Grid Bias 9V pack with 1.5V taps, Pertrix yellow carton C/N 460 1s. See Winner 9.

    (1 shilling = £0.05, 1d = 1 pence = 1/240th of £)

  • Literaturnachweis
  • - - Manufacturers Literature (Ready Radio 303 , Meteor SG3 magazine, 16 pages + cover)
  • Autor
  • Modellseite von Michael Watterson angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum