AM/FM Stereo Tuner RT-1024
Roland Electronics Co. Ltd., Rotel; Tokyo
- País
- Japon
- Fabricante / Marca
- Roland Electronics Co. Ltd., Rotel; Tokyo
- Año
- 1976 ?
- Categoría
- Radio - o Sintonizador pasado WW2
- Radiomuseum.org ID
- 150330
- Numero de transistores
- Hay semiconductores.
- Semiconductores
- Principio principal
- Superheterodino en general
- Gama de ondas
- OM y FM
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 120; 100; 117; 220; 240 Volt
- Altavoz
- - Este modelo usa amplificador externo de B.F.
- Material
- Metálico
- de Radiomuseum.org
- Modelo: AM/FM Stereo Tuner RT-1024 - Roland Electronics Co. Ltd.,
- Forma
- Rack
- Ancho, altura, profundidad
- 482 x 180 x 370 mm / 19 x 7.1 x 14.6 inch
- Anotaciones
-
A hi-fi AM/FM stereo tuner with an analogue dial covering FM (87.5-108MHz) and MW (525-1605kHz) with built-in Dolby NR. With Multipath, Signal Strength, FM Tuning and Dolby Level meters, rotary Function selector switch (AM, FM Stereo, Stereo Only, FM Mono), switches for Hi-Blend, Multipath, Muting, FM Dolby, Dolby NR controls, indicators for Stereo and Dolby, rotary PLAY CAL Dolby/Tape calibration control, adjustable built-on AM ferrite bar antenna, terminals for AM and FM antennae and ground, RCA phono sockets for Fixed and Variable Line Output, for Dolby NR Tape input/output and Amp input/output and for Detection Output for connection to an FM 4 channel Detector, and a 400Hz Tone On/Off switch. Jack for headphones with volume control.
Specification FM SECTION Usable Sensitivity: Mono 9.3dBf (1.6µV) 50dB Quieting Sensitivity Mono 11.5dBf (2.1µV), Stereo 36dBf (35µV) Signal-to-Noise Ratio (at 65dBf) Mono 80dB, Stereo 75dB Distortion (at 65dBf) Mono 0.1%, Stereo 0.2% Frequency Response 30 - 15000Hz +0.5dB,-1 dB Selectivity: Alternate Channel 80dB Capture Ratio 1.0dB Stereo Separation: lkHz/30Hz-15kHz 47dB/35dB Spurious Response Rejection 110dB IF Rejection 110dB Image Rejection 110dB AM Suppression 60dB Muting Threshold 10µV, 30µV (fixed) Output Level fixed 775mV, variable 0-1.5V Dial Calibration Tolerance ±200kHz Antenna 300Ω balanced, 75Ω unbalanced AM SECTION AM Sensitivity (IHF) 150µV/m Image Rejection 80dB IF Rejection 80dB Signal-to-Noise Ratio 55dB Selectivity 40dB Antenna Ferrite loopstick Versions/Power requirements
120V AC 60Hz
220V AC 50/60Hz
240V AC 50/60Hz
100, 117, 220 or 240V AC 50/60Hz with voltage selectorPower consumption: 25 Watts max.
- Peso neto
- 11 kg / 24 lb 3.7 oz (24.229 lb)
- Procedencia de los datos
- -- Original prospect or advert
- Documentación / Esquemas (1)
- - - Manufacturers Literature (Owner's manual RT-1024)
- Documentación / Esquemas (2)
- - - Manufacturers Literature (Technical manual RT-1024)
- Autor
- Modelo creado por Franz Scharner. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 340 modelos, 329 con imágenes y 32 con esquemas.
Ir al listado general de Roland Electronics Co. Ltd., Rotel; Tokyo