Stereo Receiver RX-102MKII

Roland Electronics Co. Ltd., Rotel; Tokyo

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1976
  • Categoría
  • Radio - o Sintonizador pasado WW2
  • Radiomuseum.org ID
  • 150315

 Especificaciones técnicas

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Principio principal
  • Superheterodino en general
  • Gama de ondas
  • OM y FM
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 100 or 120 or 220 or 240 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 20 W (28 W max.)
  • Material
  • Madera
  • de Radiomuseum.org
  • Modelo: Stereo Receiver RX-102MKII - Roland Electronics Co. Ltd.,
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 475 x 115 x 250 mm / 18.7 x 4.5 x 9.8 inch
  • Anotaciones

  • A Stereo Hi-Fi Receiver with an AM/FM Tuner covering MW (525-1650kHz) and VHF (88-108 MHz) and a 2 x 10 watt Amplifier. On the rear, Input RCA sockets for MM cartridge, Ceramic cartridge and Aux, Input and Output RCA sockets for Tape Monitor, 300Ω and 75Ω connections for FM antenna and a connection for outdoor AM antenna, terminals for two pairs of loudspeakers (Main and Remote) and a Switched AC Outlet (N/A in UK and Scandinavia). On the front, push button switches for Power on/off, Speakers (Main, Remote), Loudness and Tape Monitor, Rotary controls for Bass, Treble, Balance, Volume and Tuning, a Rotary Function switch (AM, FM, FM Stereo, Phono, Aux), a Tuning Meter and an FM Stereo Indicator. An Illuminated dial. Socket for Headphones.

    Specification  
    Continuous Power Output 10 watts per channel, min. RMS
    both channels driven into 8Ω or
    14 watts per channel, min. RMS
    both channels driven into 4Ω
    from 50Hz to 20kHz with no more
    than 1.0% Total Harmonic Distortion
    Intermodulation Distortion < 0.3% ( 8Ω, rated power)
    Frequency Response 20Hz - 50kHz,  ± 3dB, 1 w/ch
    Damping Factor 30 (8Ω, 1kHz)
    Input Sensitivity/Impedance Tape Monitor:  150mV/45kΩ
    Aux:  150mV/45kΩ
    Phono:  2mV/60kΩ
    Tape Output 300mV/3.3kΩ
    Hum & Noise S/N Phono:  70dB
    Tape:  85dB
    Loudspeaker load impedance 4 - 16Ω

    Power Requirements/Versions
    120 V AC 60Hz         /  CSA, UL 
    220 V AC 50-60Hz
    240 V AC 50-60Hz   /  BS
    100/117/220/240 V AC 50-60Hz Switchable (Not available in UK, Canada and Scandinavia)

    Power Consumption :  35 watts

    See also the earlier Rotel RX-102 Stereo Receiver.

    AM/FM-Receiver mit 2 x 10 Watt Sinus an 8 Ohm oder 2 x 14 Watt Sinus an 4 Ohm.

  • Peso neto
  • 6.5 kg / 14 lb 5.1 oz (14.317 lb)
  • Procedencia de los datos
  • -- Original prospect or advert
  • Documentación / Esquemas (1)
  • - - Manufacturers Literature (Owner's Manual for the RX-102 MkII AM/FM Stereo Receiver)
  • Documentación / Esquemas (2)
  • - - Manufacturers Literature (Technical Manual for the RX-102 MkII AM/FM Stereo Receiver dated Aug 76)
  • Autor
  • Modelo creado por Franz Scharner. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum