Stereo Integrated Amplifier RA-400
Roland Electronics Co. Ltd., Rotel; Tokyo
- Pays
- Japon
- Fabricant / Marque
- Roland Electronics Co. Ltd., Rotel; Tokyo
- Année
- 1981
- Catégorie
- Amplificateur BF ou mélangeur BF
- Radiomuseum.org ID
- 288590
Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.
- No. de transistors
- Semi-conducteurs présents
- Semi-conducteurs
- Principe général
- Amplification audio
- Gammes d'ondes
- - sans
- Particularités
- Equipement HIFI
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 120; 220; 240 Volt
- Haut-parleur
- - Ce modèle nécessite des HP externes
- Puissance de sortie
- 44 W (sans distorsion)
- Matière
- Boitier métallique
- De Radiomuseum.org
- Modèle: Stereo Integrated Amplifier RA-400 - Roland Electronics Co. Ltd.,
- Forme
- Appareil d'étagère
- Dimensions (LHP)
- 430 x 66 x 274 mm / 16.9 x 2.6 x 10.8 inch
- Remarques
-
A hi-fi stereo integrated amplifier with continuous power output of 2 x 22 WRMS both channels driven into 8 ohms. With a 5 LED Power Output indicator, rotary bass and treble tone controls, a rotary Function switch (Tuner, Phono, Aux), push button switches for Speakers A and B, Loudness, tape Monitor, RCA phono sockets for Phono, Tuner, Aux input and Tape Monitor input/output, terminals for 2 pairs of loudspeakers and a jack for headphones.
There is also a DC 16 V, 170 mA socket on the back to power the Rotel RT-400 AM/FM Stereo Tuner or the Rotel RT-400L MW/LW/FM Stereo Tuner.
Specification Continuous Power Output 22 watts per channel, min. RMS
both channels driven into 8Ω from 20 to 20,000Hz
with no more than 0.08% Total Harmonic DistortionIntermodulation Distortion
(60Hz : 7kHz = 4 : 1)No more than 0.08%
(continuous rated output power)Output: Speaker
HeadphoneA, B (4-16Ω); A + B (8-16Ω)
4-16ΩDamping Factor 38 (20 - 20,000Hz, 8Ω) Input Sensitivity/Impedance PHONO (MAG) 2.5mV/47kΩ
AUX 150mV/33kΩ
TAPE IN 150mV/33kΩOutput Level/Impedance TAPE OUT 280mV/1kΩ Frequency Response PHONO 30 - 15,000Hz, +0.3dB,-0.3dB (RIAA STD)
AUX, TAPE IN 10 - 60,000Hz, +0,3dB,-2.0dBSignal-to-Noise Ratio
(IHF, A network)PHONO 82dB
AUX, TAPE IN 90dBVersions/Power Requirements:
120V AC 60Hz
220V AC 50Hz
240V AC 50Hz
120, 220, 240V AC 50/60Hz switchablePower Consumption: 85 Watts
- Poids net
- 5.2 kg / 11 lb 7.3 oz (11.454 lb)
- Schémathèque (1)
- - - Manufacturers Literature (Owner's manual RA-400)
- Schémathèque (2)
- - - Manufacturers Literature (Technical manual RA-400)
- Auteur
- Modèle crée par Howard Craven. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 340 modèles d'appareils, 329 avec des images et 32 avec des schémas.
Tous les appareils de Roland Electronics Co. Ltd., Rotel; Tokyo