Stereo Integrated Amplifier RA-400

Roland Electronics Co. Ltd., Rotel; Tokyo

Dati
Forum
Immagini
Collezioni

  • Anno
  • 1981
  • Categoria
  • Amplificatore audio o mixer audio
  • Radiomuseum.org ID
  • 288590

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di transistor
  • A semiconduttori.
  • Semiconduttori
  • Principio generale
  • Amplificatore audio
  • Gamme d'onda
  • - senza
  • Particolarità
  • Hi-Fi equipment
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 120; 220; 240 Volt
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Potenza d'uscita
  • 44 W (indistorta)
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Stereo Integrated Amplifier RA-400 - Roland Electronics Co. Ltd.,
  • Forma
  • Apparecchio per ripiani a scaffale (come i componibili HiFi).
  • Dimensioni (LxAxP)
  • 430 x 66 x 274 mm / 16.9 x 2.6 x 10.8 inch
  • Annotazioni

  • A hi-fi stereo integrated amplifier with continuous power output of 2 x 22 WRMS both channels driven into 8 ohms. With a 5 LED Power Output indicator, rotary bass and treble tone controls, a rotary Function switch (Tuner, Phono, Aux), push button switches for Speakers A and B, Loudness, tape Monitor, RCA phono sockets for Phono, Tuner, Aux input and Tape Monitor input/output, terminals for 2 pairs of loudspeakers and a jack for headphones.

    There is also a DC 16 V, 170 mA socket on the back to power the Rotel RT-400 AM/FM Stereo Tuner or the Rotel RT-400L MW/LW/FM Stereo Tuner.

    Specification  
    Continuous Power Output 22 watts per channel, min. RMS
    both channels driven into 8Ω from 20 to 20,000Hz
    with no more than 0.08% Total Harmonic Distortion
    Intermodulation Distortion
    (60Hz : 7kHz = 4 : 1)    		 No more than 0.08%
    (continuous rated output power)
    Output: Speaker
                Headphone    		 A, B (4-16Ω); A + B (8-16Ω)
    4-16Ω
    Damping Factor 38 (20 - 20,000Hz, 8Ω)
    Input Sensitivity/Impedance PHONO (MAG)  2.5mV/47kΩ
    AUX                 150mV/33kΩ
    TAPE IN           150mV/33kΩ
    Output Level/Impedance TAPE OUT        280mV/1kΩ
    Frequency Response PHONO  30 - 15,000Hz, +0.3dB,-0.3dB (RIAA STD)
    AUX, TAPE IN  10 - 60,000Hz, +0,3dB,-2.0dB
    Signal-to-Noise Ratio
    (IHF, A network)    		 PHONO           82dB
    AUX, TAPE IN  90dB

    Versions/Power Requirements:
    120V AC 60Hz
    220V AC 50Hz
    240V AC 50Hz
    120, 220, 240V AC 50/60Hz switchable

    Power Consumption:   85 Watts

  • Peso netto
  • 5.2 kg / 11 lb 7.3 oz (11.454 lb)
  • Letteratura / Schemi (1)
  • - - Manufacturers Literature (Owner's manual RA-400)
  • Letteratura / Schemi (2)
  • - - Manufacturers Literature (Technical manual RA-400)
  • Autore
  • Modello inviato da Howard Craven. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum