Stereo Integrated Amplifier RA-970BX

Roland Electronics Co. Ltd., Rotel; Tokyo

Dati
Forum
Immagini
Collezioni

  • Anno
  • 1994 ?
  • Categoria
  • Amplificatore audio o mixer audio
  • Radiomuseum.org ID
  • 307910

 Specifiche tecniche

  • Numero di transistor
  • A semiconduttori.
  • Semiconduttori
  • Principio generale
  • Amplificatore audio
  • Gamme d'onda
  • - senza
  • Particolarità
  • Hi-Fi equipment
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 115 or 230 Volt
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Potenza d'uscita
  • 120 W (indistorta)
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Stereo Integrated Amplifier RA-970BX - Roland Electronics Co. Ltd.,
  • Forma
  • Apparecchio per ripiani a scaffale (come i componibili HiFi).
  • Dimensioni (LxAxP)
  • 440 x 92 x 347 mm / 17.3 x 3.6 x 13.7 inch
  • Annotazioni

  • A 2 x 60 watt hi-fi stereo integrated amplifier. Connections for two pairs of loudspeakers. Rotary controls for Bass, Treble and Volume/Balance. Rotary switches for Tone (On, Off), Recording (Aux 1, Aux 2, Off, CD, Tuner, Tape 1) and Listening (Aux 1, Aux 2, CD, Tuner, Tape 1, Tape 2). Press buttons for Power and Speaker Remote. Jack for Headphones.

    Continuous Power Output .....: 60 watts per channel min. RMS into 8 Ω or
                                                 90 watts per channel min. RMS into 4 Ω
                                                      both channels driven from 20Hz to 20kHz
    Total Harmonic Distortion ..... :  0.03% at rated power
    Intermodulation Distortion .....:  0.03% at rated power
    Damping Factor .................. : 150 (20Hz to 20kHz, 8Ω)
    Frequency Response ...........: 10Hz - 100kHz +1.0dB, -3.0dB
    Signal to Noise ratio Line .....:  > 95dB (IHF A Network)

    Speaker impedance .............:  Direct or Remote 4Ω minimum per speaker
                                                  Direct and Remote 8Ω minimum per speaker

    Versions/Power Requirements
    115 V AC 60Hz
    230 V AC 50Hz
     

  • Peso netto
  • 6.2 kg / 13 lb 10.5 oz (13.656 lb)
  • Letteratura / Schemi (1)
  • - - Manufacturers Literature (Technical Manual for the RA-970BX)
  • Letteratura / Schemi (2)
  • - - Manufacturers Literature (Owner's Manual for the RA-970BX)
  • Autore
  • Modello inviato da Howard Craven. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

 Forum