Integrated Amplifier 1140 TA-1140

Sony Corporation; Tokyo

  • Anno
  • 1971–1974
  • Categoria
  • Amplificatore audio o mixer audio
  • Radiomuseum.org ID
  • 157849

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di transistor
  • 41
  • Semiconduttori
  • Principio generale
  • Amplificatore audio
  • Gamme d'onda
  • - senza
  • Particolarità
  • Hi-Fi equipment
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 100; 120; 220; 240 Volt
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Potenza d'uscita
  • 80 W (100 W max.)
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Integrated Amplifier 1140 TA-1140 - Sony Corporation; Tokyo
  • Forma
  • Apparecchio per ripiani a scaffale (come i componibili HiFi).
  • Dimensioni (LxAxP)
  • 400 x 149 x 316 mm / 15.7 x 5.9 x 12.4 inch
  • Annotazioni
  • A solid state hi-fi stereo integrated amplifier housed in a metal case with power output of 40 watts RMS per channel into 8 ohms or 50 watts RMS per channel into 4 ohms. With rotary bass and treble tone controls, push button switches for speakers (main and remote), mode (reverse, stereo, L + R), filters low and high, switches for bass turn-over (500Hz, 250Hz), treble turn over (2.5kHz, 5kHz), loudness, tape monitor (tape1, source, tape2). RCA phono sockets for input Phono1, Phono2, Tuner and Aux1, for input/output Tape1 and Tape2, for pre-amplifier output and power amplifier input, and for centre channel output, DIN socket for Tape1 Rec/Pb, terminals for 2 pairs of loudspeakers and jacks for headphones and Aux2.

    Specifications  
    Power Amplifier Section  
    RMS power per channel
    both channels driven
    40 watts into 8Ω
    50 watts into 4Ω
    Dynamic power
    both channels driven
    120 watts into 8Ω
    190 watts into 4Ω
    Power bandwidth 6Hz - 35kHz, IHF
    Harmonic distortion (20Hz-20kHz) < 0.1% at rated output
    IM distortion < 0.1% at rated output
    Input impedance 100kΩ
    Input sensitivity (for rated output) 0.85V
    Signal/Noise ratio > 110dB (shorted input)
    Preamplifier Section  
    Frequency response  
     PHONO1,2 RIAA curve ± 0.5dB
     TUNER,AUX1,2,TAPE1,2,
     REC/PB (input)
    15Hz - 80kHz ±2dB
    Input sensitivity/impedance  
     PHONO1,2 1.2mV/47kΩ
     TUNER,AUX1,2,TAPE1,2
     REC/PB (input)
    130mV/100kΩ
    Signal output/impedance REC OUT: 130mV/10kΩ
      PRE OUT: 1V/3kΩ
    REC/PB (output): 30mV/80kΩ
    Signal/Noise ratio  
     PHONO1,2 > 70dB (weighting network "B")
     TUNER, AUX1,2,TAPE1,2,REC/PB > 90dB (weighting network "A")
    Filters LOW:  6dB/oct, below 70Hz
    HIGH:  6dB/oct, above 5kHz

    Versions/Power requirements
    GEP, NEP  /  100, 120, 220, 240V AC 50/60Hz with voltage selector

    Power consumption: 200 watts

    Vollverstärker, dynamische Ausgangsleistung : (IHF) 120W/8 Ohm; 190W/4 Ohm
    Sinusleistung: 2 x 40W/8 Ohm Sinusleistung Din: 2 x 50W/4 Ohm
    Beide Kanäle gleichzeitig betrieben: 2 x 35 Watt /8 Ohm
    Klirrfaktor: Vollaussteuerung : <0,1%
    Eingänge: Phono; Tuner; Reserve; Band.

    Preis in Deutschland: 1.111,00 DM

  • Peso netto
  • 9.8 kg / 21 lb 9.4 oz (21.586 lb)
  • Prezzo nel primo anno
  • 59,800.00 JPY
  • Bibliografia
  • -- Original prospect or advert (1973-74 Sony Programm Ubersicht catalogue)
  • Letteratura / Schemi (1)
  • Selezione Radio-TV Dezember 1972
  • Letteratura / Schemi (2)
  • - - Manufacturers Literature (Service manual Sony TA-1140 dated 1971)
  • Autore
  • Modello inviato da Eduard Abfalterer. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Integrated Amplifier 1140 fa parte delle collezioni dei seguenti membri.

 Forum