Stereo Tape Recorder Automatic Reverse A4000S

TEAC; Tokyo

  • Jahr
  • 1966 ?
  • Kategorie
  • Ton-/Bildspeichergerät oder -Spieler
  • Radiomuseum.org ID
  • 265537
    • Marke: Tascam

 Technische Daten

  • Anzahl Transistoren
  • Halbleiter vorhanden.
  • Halbleiter
  • Hauptprinzip
  • NF-Verstärkung
  • Wellenbereiche
  • - ohne
  • Spezialitäten
  • Tonbandgerät
  • Betriebsart / Volt
  • Wechselstromspeisung / 100-240 Volt
  • Lautsprecher
  • - Für Kopfhörer oder NF-Verstärker
  • Material
  • Gerät mit Holzgehäuse
  • von Radiomuseum.org
  • Modell: Stereo Tape Recorder Automatic Reverse A4000S - TEAC; Tokyo
  • Form
  • Tischgerät, Hochformat (höher als quadratisch, schlicht, keine Kathedrale).
  • Abmessungen (BHT)
  • 17.375 x 17.438 x 8.5 inch / 441 x 443 x 216 mm
  • Bemerkung
  • TEAC Stereo Tape Recorder  with Automatic Reverse model A400S

    • Recorder A4000 includes the mechanical tape transport and the playback amplifier.
      It  requires the amplifier Teac RA-40 that includes recording amplifiers and Bias Oscillator. Series A4000 and A4000S appear in 1966. Series A4010 and A4010S
      appear in 1967 with small improvements; Series A4010 GSL appears in 1973 dealing
      with the new tape SLH.
      The two unities are connected  by 2 RCA cables and two multi wire cables and multi contact connectors.
      The integrated system A4000 and RA-40 is labelled as A4010.
    • Tape format: 1/4” width
    • Track format: 4 Track 2 Channels
    • Reel Size: 7 inch (maximum) ; 5 inch minimum
    • Tape speed: 7.5 ips  and 3.75 ips  ± 0.5 %
    • Wow and Flutter: 7.5 ips < 0.12%. 3.75 ips  < 0.15%  (weighted)
    • Heads: 4: erase, record, forward play and reverse play
    • Motors: 3: one for capstan 2 speed hysteresis synchronous; 2 eddy current type outer-rotor motor for reel drive
    • Bias Frequency: 100 kHz
    • Jack  line inputs – 140 mV  10 k ohms unbalanced
    • Jack  mic inputs – 0.25 mV 10 k ohms  unbalanced
    • Jack  output – 1 V for load impedance  > 100 k ohms
    • Headphone output: requires high impedance headphone
    • S/N ratio: > 50 dB weighted
    • Frequency response:
      • at 7.5 ips: 30 Hz – 20 kHz  (50 Hz – 15 kHz at  ±3 dB)
      • at 3.75 ips: 40 Hz – 15 kHz (50 Hz – 10 kHz at  ±3 dB)
    • Crosstalk: 50 dB (channel to channel at 1000 Hz) 40 dB between tracks at 100 Hz
    • Power requirements: 100-240 V, 50/60 Hz, 100 W.
  • Nettogewicht
  • 20 kg / 44 lb 0.8 oz (44.053 lb)
  • Literaturnachweis
  • - - Manufacturers Literature
  • Autor
  • Modellseite von Moisés Piedade angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Stereo Tape Recorder Automatic Reverse befindet sich in den Sammlungen folgender Mitglieder.

 Forum