Constant Amplitude Signal Gen. 191

Tektronix; Portland, OR

  • Anno
  • 1966
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 121247

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di tubi
  • 2
  • Numero di transistor
  • 6
  • Semiconduttori
  • Gamme d'onda
  • Gamme d'onda nelle note.
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 115/230 Volt
  • Altoparlante
  • - Per cuffie o amplificatori esterni
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Constant Amplitude Signal Gen. 191 - Tektronix; Portland, OR
  • Forma
  • Soprammobile con qualsiasi forma (non saputo).
  • Dimensioni (LxAxP)
  • 228 x 171 x 400 mm / 9 x 6.7 x 15.7 inch
  • Annotazioni
  • Frequenzbereich: 0,35...100 MHz und Festfrequenz 50 kHz. Gerät dient zur Überprüfung des Frequenzganges vom X- und Y-Verstärker eines Oszillografen.

    The Tektronix Type 191 Constant-Amplitude Signal Generator produces sine waves whose amplitude remains constant as the frequency is varied, provided the load limitations of the instrument are not exceeded. Front-panel controls indicate the peak-to-peak voltage of these sine waves at the input to a 50 ohm load.
    This instrument is useful for making frequency-response measurements of broadband devices operating in the frequency range from 350 kilohertz to 100 meghertz.
    The characteristics apply over an ambient temperature range of 0° C to +50° C. Warm-up time for the given accuracies is 5 minutes at 25° C ±5° C.
  • Peso netto
  • 9.5 kg / 20 lb 14.8 oz (20.925 lb)
  • Prezzo nel primo anno
  • 695.00 $
  • Fonte dei dati
  • -- Collector info (Sammler)
  • Autore
  • Modello inviato da un iscritto da A. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Constant Amplitude Signal Gen. fa parte delle collezioni dei seguenti membri.

 Forum