Oscilloscope RM35A

Tektronix; Portland, OR

  • Jahr
  • 1959–1972 ??
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 237076

 Technische Daten

  • Anzahl Röhren
  • 61
  • Röhren
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Wechselstromspeisung / 105-125; 210-250 Volt
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Oscilloscope RM35A - Tektronix; Portland, OR
  • Form
  • Rack
  • Abmessungen (BHT)
  • 20 x 13 x 24 inch / 508 x 330 x 610 mm
  • Bemerkung
  • The Tektronix Type RM35A is a rack-mount DC-to-15 Mc Oscilloscope with a wide range of sweep delay. It is easier to operate and offers higher performance than its predecessor, the Type 535.
    Color-correlated controls contribute greatly to ease of operation. Other contributing factors to easy operation of the Type 535A are simplified panel layout and horizontal display control, single-knob sweep and calibrator controls, and internal triggering for sweep delay.
    Greater reliability has been achieved through use of the new frame-grid twin triodes, and a change to silicon diodes in the power supplies. Performance improvement includes an extra 5 Mc in vertical response and wider range of sweep delay.

    Simplified panel layout. Color-correlated controls.
    Two Kinds of Sweep Delay
    Triggered jitter free—delayed sweep is started by signal under observation. Conventional—delayed sweep is started by delayed trigger.
    Greater Calibrated Delay Range
    1 µsec to 10 sec, continuously adjustable (2 µsec/cm to 1 sec/cm).
    DC-to-15 MC Vertical Amplifier
    All Tektronix Type A to Z Plug-In Preamplifiers can be used for signal-handling versatility.
    Two Time-Base Generators
    Time Base A - 0.1 µsec/cm to 5 sec/cm in 24 calibrated steps, continuously variable from 0.1 µsec/ cm to 12 sec/cm. 5-x magnifier increases calibrated range to 0.02 µsec/cm. Single-sweep provision for one-shot applications.
    Time Base B—Also functions as delay generator.
    18 calibrated steps from 2 µsec/cm to 1 sec/cm.
    CRT: T533P2

  • Nettogewicht
  • 67 lb 0 oz (67 lb) / 30.418 kg
  • Literaturnachweis
  • - - Manufacturers Literature
  • Autor
  • Modellseite von Massimo Follaro angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Oscilloscope befindet sich in den Sammlungen folgender Mitglieder.

 Forum