Model 1202 Dual Band Wattmeter

Ten-Tec Inc.; Sevierville, TN

Data
Forum
Pictures
Collections

  • Year
  • 1995 ??
  • Category
  • Amateur Equipment (Other, but not Key)
  • Radiomuseum.org ID
  • 342546

 Technical Specifications

  • Wave bands
  • Wave Bands given in the notes.
  • Power type and voltage
  • Batteries / addl. power jack / 1 x 9 / 9 to 14 Volt
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Model 1202 Dual Band Wattmeter - Ten-Tec Inc.; Sevierville, TN
  • Dimensions (WHD)
  • 6 x 3 x 4 inch / 152 x 76 x 102 mm
  • Notes

  •  HF/VHF SWR Bridge and Wattmeter covering 1.8 - 54 MHz plus 2-Meters. Separate HF and VHF connectors allows connecting both rigs at the same time. Includes range switch for 20 or 200 watt scales, HF/VHF selection switch, and sensitivity control. Housed in a rugged steel enclosure.

    Specifications:

        Frequency Coverage: HF: 1.8 to 54 MHz, VHF: 140 to 150 MHz
        RF Power Ranges: 0 - 200 and 0 - 20 watts RF
        Wattmeter Accuracy: +/- 10% of full scale reading with 50 ohm resistive load
        SWR Sensitivity: better than 2 watts
        Impedance: 50 ohms nominal
        Circuitry: Separate HF and VHF sensing circuits, each with op-amp boosted forward and        reverse voltage outputs
        Battery Life: Approximately one week continuous (9V alkaline cell)
        External Power: 9 to 14 volts DC (2.1 mm connector, positive center)
        

     

  • Net weight (2.2 lb = 1 kg)
  • 1.75 lb (1 lb 12 oz) / 0.795 kg
  • Price in first year of sale
  • 49.00 USD
  • Mentioned in
  • QRP Amateur Radio Club International Quarterly ( Fall 1996)
  • Author
  • Model page created by Greg Hubbard. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Model 1202 Dual Band Wattmeter is part of the collections of the following members.

 Forum