Model 1202 Dual Band Wattmeter
Ten-Tec Inc.; Sevierville, TN
- Pays
- Etats-Unis
- Fabricant / Marque
- Ten-Tec Inc.; Sevierville, TN
- Année
- 1995 ??
- Catégorie
- Appareil amateur (divers et sans touches)
- Radiomuseum.org ID
- 342546
- Gammes d'ondes
- Bandes en notes
- Tension / type courant
- Batteries / Alim. BT séparée avec fiche / 1 x 9 / 9 to 14 Volt
- Haut-parleur
- - - Pas de sortie basse fréquence
- Matière
- Boitier métallique
- De Radiomuseum.org
- Modèle: Model 1202 Dual Band Wattmeter - Ten-Tec Inc.; Sevierville, TN
- Dimensions (LHP)
- 6 x 3 x 4 inch / 152 x 76 x 102 mm
- Remarques
-
HF/VHF SWR Bridge and Wattmeter covering 1.8 - 54 MHz plus 2-Meters. Separate HF and VHF connectors allows connecting both rigs at the same time. Includes range switch for 20 or 200 watt scales, HF/VHF selection switch, and sensitivity control. Housed in a rugged steel enclosure.
Specifications:
Frequency Coverage: HF: 1.8 to 54 MHz, VHF: 140 to 150 MHz
RF Power Ranges: 0 - 200 and 0 - 20 watts RF
Wattmeter Accuracy: +/- 10% of full scale reading with 50 ohm resistive load
SWR Sensitivity: better than 2 watts
Impedance: 50 ohms nominal
Circuitry: Separate HF and VHF sensing circuits, each with op-amp boosted forward and reverse voltage outputs
Battery Life: Approximately one week continuous (9V alkaline cell)
External Power: 9 to 14 volts DC (2.1 mm connector, positive center)
- Poids net
- 1.75 lb (1 lb 12 oz) / 0.795 kg
- Prix de mise sur le marché
- 49.00 USD
- Littérature
- QRP Amateur Radio Club International Quarterly ( Fall 1996)
- Auteur
- Modèle crée par Greg Hubbard. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 44 modèles d'appareils, 37 avec des images et 12 avec des schémas.
Tous les appareils de Ten-Tec Inc.; Sevierville, TN
Collections
Le modèle Model 1202 Dual Band Wattmeter fait partie des collections des membres suivants.