SSB Transceiver FT-101E

Yaesu-Musen Co. Ltd.; Tokyo

Données
Forum
Images
Collections

  • Année
  • 1975–1978
  • Catégorie
  • Emetteur/récepteur (TRX) amateur (et transceiver)
  • Radiomuseum.org ID
  • 69098

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de tubes
  • 3
  • No. de transistors
  • 40
  • Semi-conducteurs
  • Principe général
  • Transceiver (poste récepteur/émetteur combiné)
  • Gammes d'ondes
  • Bandes en notes
  • Tension / type courant
  • Secteur et Piles (tous types). / 100-234 / 12 Volt
  • Haut-parleur
  • HP dynamique à aimant permanent + bobine mobile
  • Puissance de sortie
  • 3 W (max.)
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: SSB Transceiver FT-101E - Yaesu-Musen Co. Ltd.; Tokyo
  • Forme
  • Modèle de table générique
  • Dimensions (LHP)
  • 340 x 153 x 285 mm / 13.4 x 6 x 11.2 inch
  • Remarques

  • Yaesu HF-Transceiver FT-101E.
    Frequency range: 160 to 10 m HAM-Bands plus CB and reception of time-stations in the 10-MHz-range. Modes; SSB, CW, AM; Speech-processor built in; Pout: 90 W.
    Also available as FT-101EE without an R.F. Processor.
    In Europe also sold as Sommerkamp FT-277E.

  • Poids net
  • 15 kg / 33 lb 0.6 oz (33.04 lb)
  • Prix de mise sur le marché
  • 749.00 $
  • Source extérieure
  • Eilert Menke
  • Auteur
  • Modèle crée par d'un membre de D. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle SSB Transceiver fait partie des collections des membres suivants.

 Forum

Contributions du forum pour ce modèle: Yaesu-Musen Co. Ltd.: SSB Transceiver FT-101E

Discussions: 2 | Publications: 3

http://foxtango.org/foxtango005.htm

Eilert Menke, 27.Oct.04

Weitere Posts (1) zu diesem Thema.

From www.mods.dk, author not known:

There will come a time when the finals in your FT101E will need replacing. These transceivers were originally equipped with 6JS6C tubes manufactured by NEC.
This tube's properties are slightly different from the 6JS6C tubes available today from American tube manufacturers. By the way, don't bother looking for tubes made by NEC. They got out of the business several years ago.

In order to use the "American" variety 6JS6's, a simple modification to the neutralization circuit must be made to the final section of the transceiver.

The modification consists of replacing the fixed value 100 pf 1000 VDC mica capacitor with a 10 pf 1000 VDC mica capacitor. This capacitor, C125, is in series with the 10 pf variable neutralizing capacitor off of the plate circuit.

If this modification has not already been completed on your rig, be sure to use a mica or silver mica of at least 1000 VDC. Do not substitute a different type, because the heat in the final compartment will change the value, and your tubes will fail prematurely. Also, be very careful to keep all leads short and in exactly the same orientation as the original capacitor.

Before reneutralizing, open the variable neutralizing capacitor all the way to minimum engagement and follow the neutralizing instructions in the manual. While dipping the plate, remember to adjust the neutralizing capacitor for equal value meter reading peaks (IC position) on both sides of the dip when tuning the "Plate" control.

Eilert Menke, 23.Jun.04

Weitere Posts (2) zu diesem Thema.