radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

6J5_China

Information - Help 
ID = 70332
       
Country:
People's Republic of China
Brand: Common type China (PRC) tube/semicond.
Tube type:  Vacuum Pentode 
Identical to 6J5_China = 6Ж5П

Was used by Radio/TV-reception etc.
Filament Indirect / Parallel, (AC/DC defined voltage)
Information source -- Schematic   
  prc_peony_1201_preamp_sch.png
  6J5_China: 11-Radio manual (green 2) 1965
Bernhard Nagel
 
6j5_china_photo.jpg
6J5_China: home made photograph
Giuseppe Feniello

 
china_6j5_pin_assignment.png
6J5_China: FIVRE Tube Manual
Giuseppe Feniello

 

Usage in Models 1= 1960??

Quantity of Models at Radiomuseum.org with this tube (valve, valves, valvola, valvole, válvula, lampe):1


Forum contributions about this tube
6J5_China
Threads: 1 | Posts: 9
Hits: 557     Replies: 8
6J5 chinese power tube pin assignment
Giuseppe Feniello
16.Nov.20
  1

Hello radiofriends,

recently I have bought a tube preamplifier that uses two 6J5 tube ( chinese version with 7 pins ).

Please have someone the pin configuration for this tube? many thanks in advance.

Bernhard Nagel
16.Nov.20
  2

Hello Giuseppe,

please show some good detailed pictures of the 7-pin Chinese 6J5 here in the forum and upload them also to the tube page. Maybe the pin-out can be determined by examination the pics.

Furthermore, the preamplifier should be added as a new model suggestion.

Until now, the only model in RMorg using this tube, is a Chinese console Peony 牡丹 1201. Real pictures are stil missing there.

According to the schematic, the Chinese 6J5 is a kind of beam power tube. It's not a triode, in contrast to all other 6J5 variants.

Thanks for your assistance in this matter.

Best regards
Bernhard

Giuseppe Feniello
16.Nov.20
  3

Hello Bernhard,

thanks for your reply, till now I have found the pins 3 and 4 are the heater filament, and think the pins are the same of the chinese 6J1 pentode, but obviously I'm not sure!

The heater current is about 430mA @ 6,3Vcc

this preamp is a kit, not a complete model.....

I have attached a photo of this tube

best regards...

G.

Attachments

Jacob Roschy
17.Nov.20
  4

Hello,

the 6J5_China is obviously the Chinese version of the Russian 6Ж5П, which in turn is the Russian version of the 6AH6.

It uses a beam structure, but it's no power output tube, - which wouldn't make sense in a preamplifier.

Best Regards,
Jacob

 

Giuseppe Feniello
17.Nov.20
  5

Thanks  Jacob for your notes ! 

so the pin assignment are like the russian version  .....in my preamp, this tube is used as a triode with a connection between pin 5 and 6.

However the chinese schematic uses it as a power output tube in the AF final stage.....

now I know all the pins functions....thanks again.

best regards.

G.

Jacob Roschy
17.Nov.20
  6

The datasheet of the equivalent 6AH6 tells about a maximum plate dissipation of 3.2 W, a nominal operating plate current of 10 mA at 300 V, which may be sufficient for a modest output power, but there is nothing told about this use.

B R, Jacob

Giuseppe Feniello
17.Nov.20
  7

Thanks Jacob,

the the pin assignment picture in the 6J5_China page is not the right one, in reality there is not an internal connection between pin 2 and pin 7.....I have uploaded a new pin assignment picture.

B R.....

G.

Attachments

Jacob Roschy
17.Nov.20
  8

Unfortunately a wrong base diagram was shown at the original 6AH6 page, which I've copied unaware to the 6J5_China page. Now I've replaced it by the correct one everywhere.

BR Jacob

Giuseppe Feniello
18.Nov.20
  9

THANKS !!! Now the tube page is OK !

 
6J5_China
End of forum contributions about this tube

You reach this tube or valve page from a search after clicking the "tubes" tab or by clicking a tube on a radio model page. You will find thousands of tubes or valves with interesting links. You even can look up radio models with a certain tube line up. [rmxtube-en]
  
rmXorg