radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

AR2volt_MOV

Information - Help 
ID = 57573
       
Country:
Great Britain (UK)
Brand: MO Valve Co. Ltd.; GB
Tube type:  Triode, vacuum 
  <1925 very rare. ***
Identical to AR2volt_MOV

Base IS-2 (Interservice, UK 1918)
Was used by Military and/or Government
Filament Vf 2 Volts / If 0.4 Ampere / Direct
Description Made for the British Army. This base used for this tube was the IS-2. This base was a molded ebonite "box" which had two square contacts on the bottom for the filament and a long side contact on each side for the anode and grid. The square studs measured 3.4mm x 4.7mm. The tube was also made with the IS-4 base (see photos). This was also an ebonite "box", somewhat bigger than the IS-2 base. It had four round stud pins, each 6mm x 7mm diameter. Two were on the bottom for the filament and one on each side for the anode and grid connections. Also made by Ediswan. The designer of these two bases is not known. 
Dimensions (WHD)
incl. pins / tip
35 x 86 x mm / 1.38 x 3.39 x inch
Information source British Radio Valves - The Vintage Years, Thrower   Pages 45 & 86
 
ar2volt_is_2.jpg
AR2volt_MOV: Fin Stewart collection
Fin Stewart

 


You reach this tube or valve page from a search after clicking the "tubes" tab or by clicking a tube on a radio model page. You will find thousands of tubes or valves with interesting links. You even can look up radio models with a certain tube line up. [rmxtube-en]
  
rmXorg