radiomuseum.org

 
Please click your language flag. Bitte Sprachflagge klicken.

CV58

Information - Help 
ID = 19455
       
 
   
Tube type:  Signal Diode - one single system   UHF 
Identical to CV58 = E1273 = REL47
Similar Tubes
Normally replaceable-slightly different:
  CV258

Was used by Radar
Filament Vf 6.3 Volts / If 0.36 Ampere / Half indirect / Parallel, (AC/DC)
Description

UHF mixer diode, designed to be used in balanced or coaxial lines up to over than 3GHz (9 cm). 0.05mm anode to cathode spacing.
Available since 1942.

Vacuum diodes and triodes were experimented as mixers in the receivers of the early 10-cm radar sets. Silicon diodes were easily burnt by the high-power pulses of magnetron transmitters, while vacuum devices were capable to withstand energy of RF pulses. Unfortunately they were too noisy and never came out of the experimental stage.

 
Text in other languages (may differ)
Dimensions (WHD)
incl. pins / tip
12 x 44 x 12 mm / 0.47 x 1.73 x 0.47 inch
Information source -- Original prospect or advert   Callick, metres to Microwaves
-- Original-techn. papers.   
 
gb_cv58.jpg
CV58: TreLe
Trev Levick

 
cv58_1.png
CV58: Manufacturer's Literature
Emilio Ciardiello



You reach this tube or valve page from a search after clicking the "tubes" tab or by clicking a tube on a radio model page. You will find thousands of tubes or valves with interesting links. You even can look up radio models with a certain tube line up. [rmxtube-en]
  
rmXorg