radiomuseum.org

P1_CeCo

Information - Aide 
ID = 73045
       
Pays:
Etats-Unis
Fabricant: CeCo (tubes), C.E. Mfg. Co. Inc.; Providence, RI
Concepteur: CeCo (tubes), C.E. Mfg. Co. Inc.; Providence, RI 
Type:  Vacuum Pentode   RF/IF-Stage 
Identique à P1_CeCo = AC-PENTODE_CeCo

Culot UY-Base, 5 Pins (USA, April 1927) Connexion au sommet et latérale.
Utilisé par Radio/TV-reception etc.
Chauffage Vf 2.5 Volt / If 1.75 Ampère / Indirect / Specified voltage AC/DC
Description

This is a specially designed tube only made by CeCo and was announced in the April, 1930 issue of Radio Craft, page 512. It was used for RF amplifier stages of mains a/c voltage radios. The Norden-Hauck Super DX-5 is the only recorded receiver to use the tube. The tube has a very high amplification factor of 750. The control grid is connected to the top cap and the space charge grid is connected to the screw terminal on the side of the base. Compared to the UY224, the P1 has a comparative RF gain of 23 percent. It is the same tube as the AC_CeCo, made in 1930 but an earlier version.

 
Dimensions
(l x h x p)
incl.pins/tip
x 123 x 45 mm / x 4.84 x 1.77 inch
Poids 48 g / 1.69 oz
Bibliographie Radio Craft   April 1930, page 512
Tube Lore (II)   Page 32
-- Collector info (Sammler)

pentode_ceco.png P1_CeCo: W.H.
Wolfgang Holtmann


Just Qvigstad

Collection de

 
screenshot_20211012_220429_gallery.jpg

Plus d'infos ...
 

[rmxtube-fr, noindex]
  

Mentions légales Plus d'informations