radiomuseum.org

rca: RCA-Rider Chanalyst 162C -- stand-by function

Moderatori:
Martin Renz Ernst Erb Vincent de Franco Martin Bösch Mark Hippenstiel Bernhard Nagel Dietmar Rudolph Otmar Jung Heribert Jung Eilert Menke 
 
Per saperne di più, clicca sul pulsante blu d'aiuto.
Forum » Radio e altri tipi di apparecchi (dalla fisica alle TV) » MODELLI NEL SITO » rca: RCA-Rider Chanalyst 162C -- stand-by function
           
Rich Post
 
 
USA  Articoli: 13
Schemi:
Foto: 816
09.Jun.21 23:50
Rispondi  |  Devi effettuare l'accesso (Ospite)   1

One of the important changes made in the RCA-Rider Chanalyst 162C was adding a stand-by function to the power switch.  That served to preserve the life of the 6E5 indicator tubes by cutting off most B+ to the tubes except for a feed by way of a 100K ohm resistor.  Most earlier models have much of the upper green image on the tubes worn out except for the lower portion which is activated only by the four channels. I will upload a copy of the 162-C, code 643 schematic which shows the stand-by function.

  
rmXorg