radiomuseum.org

philips: SPECIFICATIONS

Moderators:
Martin Renz Ernst Erb Vincent de Franco Martin Bösch Mark Hippenstiel Bernhard Nagel Dietmar Rudolph Otmar Jung Heribert Jung Eilert Menke 
 
Please click the blue info button to read more about this page.
Forum » Radios and other type of sets (Physics) etc. » MODELS DISPLAYED » philips: SPECIFICATIONS
           
Gary Cowans
Gary Cowans
Editor
AUS  Articles: 29
Schem.:
Pict.: 3790
25.May.21 03:20

Count of Thanks: 1
Reply  |  You aren't logged in. (Guest)   1

SPECIFICATIONS

Record Player:

Wow & Flutter:   <0.2%
Rumble (DIN):   -55 dB
Stylus:               15 uM Diamond
Compliance:       >6.5 mm/N

Headphones
Impedance:        4- 15 Ω

Tape Recorder
Input:                    1 V into 50 k Ω
Input:                    100 mV at 7.5 kΩ
Microphone
Input:                    1 mV into 50 kΩ

Power Consumption
                             100 watts

Amplifier
Load Impedance
                             Loudspeaker:    3.5, 8 or 15 Ω
 Power Rating 8 Ω
                             90 watts Total peak music
                             18 watts per channel (RMS) 0.5% THD
Freq. Resp.:         20 Hz – 20 kHz ±3 dB
Bass control:         ±15 dB at 100 Hz
Treble Control:      ±15 dB at 10 kHz

Multi-Band Tuner
Freq. Range
MW:                      525-1605 kHz
SW1:                    10.0 – 26.7 MHz
SW2:                     3.85 – 10.2 MHz
SW3:                     1.6 – 4.2 MHz
Bandwidth
-6 dB:                    6.75 ±0.75 KHz
-20 dB:                  12.5 ±1.0 KHz

Signal to noise ratio
                                >18 dB for 300 uV/M

  
rmXorg